Audyssey MultEQ Editor app
MusicEntertainment

Audyssey MultEQ Editor app

D&M Holdings

How much does Audyssey MultEQ Editor app cost?

Prices are current as of 8 Nov 2026.

Audyssey MultEQ Editor app has no in-app products on record in the United States.

Audyssey MultEQ Editor app download price by country

CountryPrice
United States $19.99
Germany €22.99
United Kingdom £19.99
France €22.99
Canada CA$24.99
Russia RUB 1,790.00
China CN¥148.00
Netherlands €22.99
Japan ¥3,000
Australia A$29.99
India ₹1,999.00
Italy €22.99
Switzerland CHF 18.00
Denmark DKK 179.00
Spain €22.99
Brazil R$129.90
Norway NOK 249.00
Finland €22.99
Austria €22.99
Poland PLN 99.99
Sweden SEK 249.00
Belgium €22.99
Hong Kong HK$148.00
South Africa ZAR 399.99
Czech Republic CZK 499.00
Hungary HUF 8,990
South Korea ₩33,000
Malaysia MYR 99.90
Thailand THB 699.00
Greece €22.99
Ireland €22.99
New Zealand NZ$39.99
Singapore SGD 29.98
Slovenia €22.99
United Arab Emirates AED 79.99
Argentina $19.99
Belarus $22.99
Chile CLP 22,990
Estonia €22.99
Croatia €22.99
Lithuania €22.99
Mexico MX$399.00
Philippines ₱1,290.00
Portugal €22.99
Saudi Arabia SAR 89.99
Turkey TRY 999.99
Taiwan NT$690.00
Ukraine $22.99
Bulgaria €22.99
Colombia COP 99,900
Costa Rica $19.99
Cyprus €22.99
Ecuador $19.99
Indonesia IDR 399,000
Israel ₪59.90
Jamaica $19.99
Cambodia $19.99
Luxembourg €22.99
Latvia €22.99
Malta €22.99
Panama $19.99
Peru PEN 89.90
Romania RON 99.99
Slovakia €22.99
Uganda $22.99
Vietnam ₫599,000

10+ alternatives to Audyssey MultEQ Editor app

Audyssey MultEQ Editor appAudioTools, dB, Sound & AudioWiiM HomeRoonStreamMagic by Cambridge AudioVolumioKEF ConnectAV Setup Guide - USRoon ARCQuick Remote Denon Marantz AVRDirac Live
Rating / 53.34.84.23.84.04.72.44.43.64.41.9
Reviews68413K6.8K2.3K1.8K1K829753715131100
Released20172009202120152019201720202014202220242018
Monthly price—$9.99—————————
One-time price—$7.99———————$4.99—

The going rate for each plan in United States, in its own currency, shaded from the cheapest price on the row to the dearest.

Audyssey MultEQ Editor app reviews

3.3 out of 5, based on 684 reviews.

What people like

  • You get much better control over sound quality.
  • It fixes muddy bass and unclear audio issues.
  • You can turn off annoying midrange sound fixes.
  • It makes your expensive speakers sound way better.

What they complain about

  • The interface is hard to use and clunky.
  • It keeps losing connection with your receiver.
  • It costs money that should be included free.
  • Calibration errors wipe out all your saved progress.
★★★★★ United States · v1.14.1 · 15 Jun 2026

👍👍👍

Thanks to the developers of this great app! The sound on my denon x4800 receiver has become much better.

— I love music😉

★☆☆☆☆ United States · v1.14.1 · 28 Jun 2026

Not needed

I my excitement setting up my new Denon receiver, I downloaded this app. It’s not worth the 20 bucks and I put in for a refund with Apple.

— Hornblowr

★★★★☆ United States · v1.13.6 · 20 Jan 2026

Works!

After several buggy releases, happy to report that the latest version as of today (1.13.6) seems to work as expected. One minor oddity is that the subwoofer “after” curves seems to be a bit more jagged compared to the speaker curves. I wonder if it affects EQ, but no real way to tell.

— navid0308

★★☆☆☆ United States · v1.14.1 · 16 May 2026

Potential but must fix frustrating design

Need to make it much much easier to adjust the curve editor. Very hard to add precise points and modify points with a touch screen on an iPhone. It would be much easier to enter precise values into a field than trying to drag a point into exact spot and then having to drag it into the exact spot again for each speaker. There should also be an option to replicate changes across each speaker. I have spent hours trying to manually edit the curve editor and a simpler UX with edit boxes could have reduced it to minutes. The poor UX overshadows a potentially great app!

— lacroixvc

★★★☆☆ United States · v1.13.4 · 7 Dec 2025

Stagnant for years. It needs to be updated and improved

It is useful and easy to use, but it has remained stagnant for years. It needs to be updated and improved beyond adding compatibility with new AVRs. For example, a few usability wish list items… Show actual post calibration measurements, not just predicted results. Show frequency response curves after just the first set of measurements (instead of min 3 sets) to speed up the optimal placement of speakers, subs and MLP, before running the 3 to 8 measurements once the optimal positions have been determined. Allow to measure the frequency response of each speaker and subwoofer individually and by groups.

— flmiami

★★★★★ United States · v1.13.0 · 7 Jun 2025

Removed feature for no reason

This app used to be great in the past. It allowed you to send files to your receiver and to your computer as well as receive file that you have previously stored on your computer into the app so you can load it into your receiver or AV for whatever, they remove the ability to receive files from the computer, which is really frustrating. Additionally after the last update that I did all previous files that I had saved in the app disappeared highly disappointed in this app.

— Oreste191

★☆☆☆☆ United States · v1.13.5 · 22 Dec 2025

Scam

The app itself is horrendous to look at. Pathetic for “hi-fi” companies to tout this as anything to be frank. Not even worth the 20$. But the most egregious thing is the fact that they actively update their app to prevent users from using free software to calibrate your systems. They want you to use far inferior and more expensive software so you stay under their thumb. Pathetic and I genuinely pray on the downfall of these companies who actively push for 1000$ price tags on room treatment software. In all honesty, these people need to be fired and on the streets. Trying to nickel and dime customers who already pay thousands is literally insane. Getting a refund for this scam of an app that quite literally does nothing better than what your receiver already does.

— Jesusfromjesus

★★★★☆ United States · v1.13.5 · 21 Dec 2025

Basics good, user experience bad

I’ve used this app quite a bit since getting my new Denon. Works great if you live in a perfectly quiet place. It lacks one key element during the testing : being able to repeat the last test on EVERY STEP. It allows RE-do on some, not all steps. NOT on say, the 7th and 8th step. So, so close to being through it all then a random siren, honk, or other loud noise ruins the run. The Denon receiver DOES allow each step to be redone, so please dear app devs, include the ability to “repeat last” on every step.

— NoStoppin

★★☆☆☆ United States · v1.13.1 · 20 Sept 2025

Cash grab

20 bucks for a barebones app that really should have been included with a $1500 receiver

— Someone193845

★★★☆☆ Canada · v1.13.0 · 30 Jun 2025

Add the ability to specify a frequency & decibel (dB) number.

It’s amazing the amount of parameters you can change with this app! One pet peeve of mine (and many others) when adding points to the curve editor. It’s VERY difficult to adjust these points with your finger. Why not just add the ability to enter the frequency and the amount of dB? This will be a HUGE help in dialing in house curves as such! Please add this feature!

— FTech

★★★★★ United States · v1.12.0 · 22 Dec 2024

shows $19.99 paid $41

I just bought the app, it showed $19.99 and it charged me $41.52! Why?

— dark0n3

★☆☆☆☆ United States · v1.13.5 · 19 Dec 2025

Won’t find Marantz NR1510

Exact same network, will not find AVR. I’ve updated and reset everything multiple times. Confirmed IP via router access. Can’t find AVR at all.

— Julesmoke

★★★★☆ United Kingdom · v1.13.4 · 25 Nov 2025

Interesting but expensive

This app is definitely interesting to mess about with, but there isn’t too much you can do with it to make your experience considerably better. It probably isn’t worth the money, but regardless, it’s interesting to look through and see what things can be changed. The frequency graphs are useful if you’re having trouble with speaker positioning.

— ph1l1p___

★★☆☆☆ United States · v1.12.0 · 11 Jan 2025

Buggy and Annoying

I was performing a audyssey setup and when my phone locks I would lose everything and have to start over. I gave up after two tries. Last one I was on the last measurement.

— Fpl31

★★★☆☆ United States · v1.12.0 · 1 Mar 2025

Added functionality?

Might be nice but unfortunately you can’t use your phone or iPad to do the actual calibration. This would be ideal for those whose AVR is not in the room, but might be in a distant AV closet or similar. Was really hoping this would allow for initial remote calibration, but it does not.

— houstonATX

★★★★★ United States · v1.11.1 · 3 Mar 2024

Great App; Avoid Common Knowledge and Listen

There is a lot of information out there about this app you must avoid. For example, AVS and Audioholics forums tell you to turn off the mid range sound correction. This attempt is fool stricken as it is this simple compensation that helps you feel surrounded by sound, engulfed in it, this compensation is Spatial Audio and is Dolby Atmos, DTS, and Auro 3D. There is a difference between all and this app allows you to experience it all. Spatial Audio simply refers to following the speaker or object. If someone or something is making noise on the right of the screen you will hear sound coming from the right of the screen. Now let’s take a deeper dive. Dolby Atmos is meant to be experienced as round sound waves or whats refered to as a sine wave. DTS has a trianglular sound wave and Auro 3D is in between with a sawtooth sound wave. You will not be able to hear or feel the difference with midrange compensation turned off. Turning off the midrange compensation does give you the ability to listen to your speakers in a Pure and raw form. After experiencing High End Klipsch, Polk, Kef, and monolith I have found that I enjoy the performance of Elac Debut 2.0 speakers. And once I found the speakers I like the most, I then turned midrange compensation back on and enjoyed being surrounded by beautiful soundwaves. Please note, the sound comes from a superior Denon AV Receiver with a monolith and Emotiva amp with sound only rated between 90-150 watts. As you have noticed, to buy amplifiers 200 watts and above you must invest thousands, which I did not do. I simply picked the right speakers, like Elac that are fully powered at 140 watts and can perform extremely well with budget amps, like the M7100x that pushes only 90 watts. This app gives you a library of quantitative data to choose from and is simply a must if you have invested in an av receiver and so on. I thank the creators of this app and urge users to not follow the advice on AV forums but rather the acoustics in your own house and system. Filtering sound to “remove the curtains” can also be in vain. When you filter the sound you are losing the character of the sound waves and focusing on pure audio from your speakers which results in less spatial audio. Thank you

— #Kuschi Kopi's Revenge

★☆☆☆☆ United States · v1.13.3 · 24 Oct 2025

Sub roll off

The latest update now causes the low bass to be rolled off! Please remove this “feature” immediately. No one wants their 20hz bass being rolled off! The whole point of buying nice subwoofers is the deep bass impact!

— Create nickname lololol oil

★★★★☆ United States · v1.13.3 · 26 Oct 2025

Does what it says on the tin

No real complaints - works as I expected and a bit easier to use over the reciever’s built in. The positions to measure are a bit clearer and the distances measured seem right - the reciever showed larger values. Adjusting the curves and mid correction is truly useful and makes it hard to quibble about the $20 but on a $3500 purchase it should be included so one star off for that

— Kneeler999

★★☆☆☆ United States · v1.11.1 · 3 May 2024

Please fix the subwoofer levels

This app works great minus the current subwoofer bug. I consistently get -12db and have troubleshooted everything I could imagine. I used a different sub, I adjusted the gain multiple times, i flipped the phase. Same results. Every. Single. Time. Please fix this bug with the next update.

— beeFOWL

★★★☆☆ United Kingdom · v1.11.1 · 2 Oct 2024

Does the job

The app is rather ok but out dated for the money and a bit awkward to use

— carldaman

★★★★★ United States · v1.10.1 · 29 Dec 2023

Really makes a difference

Just awesome to be able to balance my setup, really enhance clarity and smooth out problems. $20 well spent, literally hours of fun. If you are wondering why spend the extra when the receiver has the same thing? From my pov you can make the most of your space and customize way beyond the one size fits all flat response. Even helps bridge the gap between home theater and music. Yes, the app is spartan in terms of educating if you are just staring out and the UX really needs some love. There could be an array of target curves to help become familiar with how a change impacts what you hear. Perhaps it could suggest solutions if you have a specific problem. Most of all it treats each speaker pair in isolation instead of treating them as a whole system, but you can still get to a happy place with a bit of trial and error. 5 stars because of what you can achieve, but I hope the developer understands that they haven’t done anyone any favors with the user experience. These is so much potential for a much better in app experience.

— MazincaZ

★☆☆☆☆ United States · v1.12.0 · 4 Feb 2025

Cannot find my avr

How can I get support for this app? I have the AVR-S670H. My AVR is hardwired and I can connect to it using the IP via browser, but the Audyssey MultEQ is showing that the IP is invalid. It will not auto detect the AVR as well. Denon and Audyssey labs do not support the app directly. Can someone contact me on how to get the app work or how I might be able to get a refund?

— Kenyon4us

★★★★☆ United States · v1.12.0 · 15 Jan 2025

It works

I read about this app from Reddit forum. It’s quite pricey but I took a chance and gave it a try. It has some quirks and some networking issues but after a few tries I was able to get it working and the difference was enormous. It was worth it in the end… some more bug fixes and refinement would make this even better

— Faux123

★★☆☆☆ United States · v1.10.1 · 13 Oct 2023

Buggy

Having set up my receiver to bi-amp my front speakers, this app seems to not be able to properly measure the speakers and the room. It switches the receiver to use front speakers A, not A+B, and the same happens when using just the B speakers. And a measurement with only A or B is not accepted by the AVR when no-amping. This is frustrating … $20 wasted!

— Davidswelt3845890

★★★☆☆ United States · v1.10.1 · 9 Dec 2023

Should be able to make more changes

Why can’t I set crossovers manually and set target curve to flat in the app? Audyssey detects my main speakers as large and sets them to full band on the AVR, but sets a crossover point different when using the app. It is really annoying. Also allow use of manual entry for curve editor so that it is easier to narrow down the adjustments.

— RyanJ84

★★★★★ United States · v1.8.0 · 7 Nov 2022

Worthy Investment

This editing app works as described with my Denon AVR S960H. Being able to see the “Before” room correction graphs allowed me to decide which speakers to keep or remove the midrange compensation by the speakers native dip around the 2khz range. I could also use the curve editor to give a slight bump in the dual subwoofer’s 25-50hz range to add just a little more punch to the deep frequencies. Being my living room isn’t the most optimum for speaker placement, I let the EQ Frequency Range setting edit the room correction at full 20-20,000hz range, rather than cutting it off near the 500hz range like many do. Using this app rather than the one built into the AVR has made a noticeable difference in sound quality, and was worth the reasonable cost. It was almost like removing a blanket off the speakers.

— Fathernature59

★☆☆☆☆ United States · v1.12.0 · 27 Jan 2025

Bad exports

9.2.4 system with an 8500h. Ran six seat tests just fine. Exporting the JSON file showed distance of ‘zero’ for all but two speakers, even though the app shows actual distance calcs. Also in the app each subwoofer has a distance calc but the JSON shows up as a single SUBMIX, apparently a munge of the two.

— Jesus___Freak

★★★★☆ United States · v1.11.1 · 17 Feb 2024

An necessity to control and edit your AVR.

I’m still very new to the use of Audyssey and owning this quality of Home Theater System my 1st system was a Bose lifestyle 16 and while I loved it then it was just plug and play not compatible with todays technology. So my recent upgrade to Denon and Klipsch 7.2.4 and getting the best possible sound has involved some learning. I must say I’m kinda enjoying the process now that I’m starting to understand it more. This app is a necessity if you want to use Audyssey that comes on your AVR. But this I know for sure since this app is owned and developed by Denon and Marantz. Not Audyssey itself they apparently only License it. But own this they certainly should offer it free to everyone who bought they’re products. I know it’s only $20 bucks but if it wasn’t necessary they wouldn’t have felt the need to buy the license and develop the app in fact Audyssey should be paying them back for improving they’re product’s so well that’s just my thought. Until they make it free though it’s a must so cough up the $20 bucks you’ll be glad you did.

— Budgetaudioatmos

★★☆☆☆ United States · v1.10.0 · 6 Sept 2023

Was working fine…..

Have been using the app for over a year without a problem. Finally decided to pay someone to calibrate my HT using REW and the multieq app about two weeks ago. We went through all the REW steps and it came time to re run Audyssey using the app. Ram Audyssey just fine then went to send the file to the AVR (Marantz SR8012) and I got a “communication error 1”. Since that time I have attempted to send the file probably over a 100 times and keep getting the same error despite trying multiple devices to send the file, soft resetting and hard resetting the AVR, resetting the wireless network, spoke with Marantz customer service and they had no answers etc….. nothing seems to work. I’m guessing maybe the update to the app that was done 2 weeks ago is making something not work? For now the app is useless for me unfortunately.

— Rafael0150

★★★☆☆ United Kingdom · v1.10.1 · 1 Dec 2023

Helpful app. UI needs improvement

This is a very useful and helpful app to adjust the sound of my Denon AVR x2800h. I believe, it’s a must have! However, the UI should be improved with portrait orientation support, as well as better curve editing options like being able to delete an added point by simply tapping on it, or perhaps it should be fixed if broken.

— vic_os

★★★★★ United States · v1.7.2 · 1 Jun 2022

Excellent flexibility

I’ve been using this app for a while now. Much better than calibration using the receiver. The flexibility to edit different things in copies and upload them is a great way to test different settings. Love it. No problems with my iPhone.

— carolynup

★☆☆☆☆ United States · v1.12.0 · 27 Dec 2024

Total waste of money and time

Users: Don’t waste your money on this app—buy a different receiver with a better calibration system. App developers: Handle problems during calibration better, including by saving work along the way. The app has failed with a “communication error” every time have I have attempted to calibrate my system, even on a rock-solid home network. The errors randomly occur during the calibration process, and when they happen all of the time spent until that point on calibration (many minutes) is wasted because the app doesn’t save the data collected along the way. Super frustrating and dumb. No amount of calibration can be worth this amount of wasted time.

— randomname703

★★★★☆ United Kingdom · v1.10.1 · 3 Dec 2023

Worth the money

I have a denon 6400H , monitor audio gold fronts , silver surrounds and gold centre ... the onboard setup always turned the subs right down , the middle was missing and the bass muddy . I was sceptical but the difference is amazing .

— Xursoc

★★☆☆☆ United Kingdom · v1.9.1 · 26 May 2023

Connection issues

On my marantz sr7015 it can't connect half the time and currently has lost connection completely. Have tried hard rest my phone and rest app and my WiFi everything but dosent connect so completely pointless app. Pretty poor!

— Theman98098

★★★☆☆ United Kingdom · v1.8.1 · 5 Feb 2023

When using this app there seem to be a problem with transducer not working

When using this app to setup my Denon AVC-X3800H there seem to be a problem with the transducer not working , which is ok when using the Audyssey built in the AV. There have been a few post on the web with people having the same issue

— m0v1em4n-uk

★★★★★ United States · v1.7.2 · 22 May 2022

A nice complement to any Denon or Marantz receivers

I see people giving a low star for too much noise and other problems, but first thing. Turn off any eco mode on your Denon or Marantz before calibration. You’ll thank me later. This app is A nice complement to any Denon or Marantz receivers. If you can buy a 2k-3k receiver then this $20 app shouldn’t be an issue.

— Joyamei

★☆☆☆☆ United States · v1.10.1 · 15 Jan 2024

YOU HAD ONE JOB

Thought it would be worth $20 to be able to disable the midrange compensation. After hard-wiring the AVR it runs through the calibration fine, but fails with a communication error trying to actually save it to the receiver. Tried power cycling it like the error suggested, same issue. Glad this wasn’t the $200 app.

— jsclayton

★★★★☆ United States · v1.10.1 · 10 Nov 2023

Re: Speaker Timing Off review

I hesitated to spend $20 on an app, but this seems to provide a great deal of control. I haven’t a clue, yet, how to use it, so I’ll be looking for online tutorials. I expected to find an EQ or similar controls, as so many had suggested this app due to the lack of manual control while using Audyssey. I’m sure I can do this with the curves, but I’ll have to learn how. On Nov 19 (it doesn’t say what year) “TOJOHNSO” posted a reviews here about the value used by Audyssey to calculate speaker distances. I was skeptical, but I used his math (multiply Audessey values by 0.875) in this app to change the calculated distances… what a difference it made! I run Tidal through WiiM Pro Plus with fixed volume, mono off, at 100% volume into stereo output and the change was very noticeable - much more depth and volume. After hearing this improvement, I grabbed a tape measure and entered actual distances for nominal additional improvement. I’ve still got a lot to learn about adjusting curves, but I recommend starting with this adjustment… which can be done without the app.

— pcedge

★★☆☆☆ United States · v1.8.0 · 3 Nov 2022

Limited

The graphic EQ is only 9 bands. This doesn’t allow you the ability to fix critical room issues. There should be an expert mode that enables a 29 band EQ. This would be on par with pro audio graphic EQs.

— LeeB1126

★★★☆☆ United States · v1.8.0 · 19 Nov 2022

Speaker Timing Off

Many have written Denon and Marantz support about an issue with speaker timing. The AVRs have the speed of sound coded as 300 m/s instead of the true speed. Of 343 m/s. To fix this, you have to manually multiply all speaker distances by 0.875. When I did that, WOW - everything snapped in to place and objects moving around the room sounded so much better. Audyssey themselves understand this issue and have addressed it in their -X desktop software ($199 per AVR license). Two things Sound United can do that so far refuse. One - update this app to automatically adjust the speaker distances so the processor will get the timing right. This would seem to be the quickest and easiest and be done first. Second is update the firmware in the AVRs with the correct speed of sound number. This isn’t rocket science and Sound United’s deafness on this issue is baffling.

— TOJOHNSO

★★★★★ United States · v1.7.1 · 23 Mar 2022

Solved my problems

My setup is in a small room and getting the sound tuned to my liking has been a journey but this app helped me run the setup much better than without it and the sound improvements are very noticeable so no complaints.

— abg101

★☆☆☆☆ United States · v1.10.1 · 14 Jan 2024

Does not work for me

I was able to connect to my SR8015 Marantz, but it would not find my subwoofer. So, usless for me. Requested refund.

— 2L 65

★★★★☆ United States · v1.8.1 · 20 Feb 2023

Works great once you adjust

I pulled my hair out after my first adjustment… but once I spent a little time with it… my denon receiver is sounding great!

— Duke O'URL

★★☆☆☆ United States · v1.7.1 · 6 Feb 2022

Fine when it’s connecting

Definitely better correction with this app however I’ve had to reset the AVR every time I want to load a new preset.

— Micro Chasm

★★★☆☆ United Kingdom · v1.5.1 · 9 Jul 2020

Good but ....

The app has worked well on my x3500h and now my x6500h without connectivity issues or crashes. I’d say it’s definitely better than the receiver only calibration, offering the ability to turn off midrange compensation (aka BBC dip) on a per channel basis and select how much of the frequency range to apply the correction to, also on a per channel basis. Where it really falls down is the curve editor and saving options, there are only 2 target curve options and no option to copy one to create a custom curve that can be selected and applied to any calibration files new and old. That said there is the functionality to adjust the target curve on a individual calibration file but you can’t apply that to all channels in the calibration i.e. if you modify the target curve for the front channel it cannot be applied to any of the other channels so you’d have create 3 target curves to do front, centre and rears. The likelihood of getting those curves the same is low given the imprecise curve editing method (manually operated drag handles). Personally I’d like to have the ability to add a custom target curve (or 2) to the 2 standard curves and then have the ability to select which curve I apply to each channel.

— Minnerr49rrr

★★★★★ United States · v1.7.1 · 2 Jan 2022

Worked great for me.

Just got a brand new Denon 1700 AVR and despite running the original MultEQ setup the sound was muffled and lacked good sound. This is a system with Paradigm speakers, so I knew right away it was something in the setup of the AVR. Lots of research brought me to this app-well worth the 20 bucks and it worked flawlessly for me. Not sure why it’s buggy on other peoples phones but it worked right out of the gate for me. The better comment is WOW I had no idea that moving a few curves around and adjusting some settings in this app would make my system sound COMPLETELY different. It’s amazing how the clarity and spatial sound is back in my system. It works, period.

— dlb21964

★☆☆☆☆ United States · v1.10.1 · 28 Dec 2023

Other AVR don’t need a pay app

Sony and Yamaha AVR’s have much better Web Interface to fine tune the sound, Sound United (Denon & Marantz) need to update the AVR to allow EQ adjustments for Pro Users, instead charging $20 for an App and/or $200 for one license to adjust what I paid for “A Surround Sound System”.

— karen that bish

★★★★☆ United States · v1.8.1 · 22 Dec 2022

Cherry on top

Allows for East profile swaps if I open a window. Allows removal of mid frequency correction and high frequency adjustment. Allows checking of bass correction. If this won’t run, try reverting the AVR vanity name to default.

— c12353262

★★☆☆☆ United Kingdom · v1.7.1 · 19 Dec 2021

Sounds expensive

Not my best app purchase. I wanted to experiment with custom EQ for my setup. This app does work but the process is just not that great. Every setting you change must be sent to the receiver which interrupts the audio. So it not easy to adjust to your taste. If only you could audition the sound before committing to it. Price of the app is mad. Hopefully they use the profit to develop something better.

— 925fan

★★★☆☆ United Kingdom · v1.3.0 · 7 May 2018

Improved sound, but expensive for ‘one time use’

Was not too impressed with sound from new Denon receiver, until I used this app to customise for speakers/room acoustics. Shame that use of the app is so expensive, why not include as part of the hardware price?

— doctorsimon

Audyssey MultEQ Editor app FAQ

Is Audyssey MultEQ Editor app free?
No. Audyssey MultEQ Editor app costs $19.99 (US) to download.
Does Audyssey MultEQ Editor app have a free trial?
No. None of its offers (US) come with a free trial.
What are the best alternatives to Audyssey MultEQ Editor app?
AudioTools, dB, Sound & Audio (4.8 from 13,426 reviews, premium from $2.99), WiiM Home (4.2 from 6,769 reviews) and Roon (3.8 from 2,315 reviews).

Audyssey MultEQ Editor app download

Last updated 3 months ago.

Audyssey MultEQ Editor app sells in 66 countries. It was released 9 years and 7 months ago, on 4 Apr 2017. It holds a 3.3 rating from 684 reviews.

Supports 11 languages: English, Dutch, French, German, Italian, Japanese, Polish, Russian, Chinese, Spanish, Swedish.

How much does Audyssey MultEQ Editor app make?

Third-party estimates for the last 30 days, worldwide — not the store's own figures, which Apple publishes for nobody.

Revenue $5K
Downloads —
Open the full Audyssey MultEQ Editor app analytics Revenue and downloads month by month, all 66 countries split out, and every product's share and trend