FGLair
Lifestyle

FGLair

GENERAL Inc.

How much does FGLair cost?

Prices are current as of 22 Nov 2026.

FGLair has no in-app products on record in the United States.

10+ alternatives to FGLair

FGLairViCareIntesis AC CloudComfort by Mitsubishi ElectricWatts® HomeVELUX ACTIVE with NETATMOCielo HomeairCloud Goin.touch 2 editionDaikin Comfort ControlFlair - Climate Control
Rating / 51.84.54.34.24.54.14.74.31.71.43.3
Reviews662155K12K8.8K7.5K7.2K5.9K4.2K403255133
Released20162016201220152020201820152020201620162017
Monthly price—$3.99—————————
Annual price—$33.99—————————

The going rate for each plan in United States, in its own currency, shaded from the cheapest price on the row to the dearest.

FGLair reviews

1.8 out of 5, based on 662 reviews.

What people like

  • Controls temperature quickly and easily
  • Useful for setting up schedules
  • Works well once initially connected

What they complain about

  • Forces you to log in constantly
  • Setup process is confusing and buggy
  • App disconnects from units randomly
★★★★★ United States · v3.4.0 · 23 Aug 2023

It works

Configuration is not very straightforward (ie how to add air conditioners to the app), but once done the app works well. It is quick to respond and errors are logged and I am notified in real time. Temp, mode and on/ off work well and too are instantaneous. The only gripe I have is that the app is depreciated in leu of the new app- Fujitsu AIRSTAGE (I have Airstages). It would be nice to offer an import function so devices in FGLair are easily imported into the AIRSTAGE app. This is not the case. To use the AIRSTAGE app I need to add my air conditioners one at a time by taking a photo of the QR code on the wifi modules. Some of my wifi adapters are not easily accessible (they are buried in the insulation in the attic). I am not doing that. Fujitsu- please offer an import function to move FGLair devices into the AIRSTAGE app. Thank you

— Abj1235

★☆☆☆☆ United States · v3.4.0 · 17 Oct 2025

Very poorly done

We’ve used this app for 2 years. It was very difficult to synch the mini split to Wi-Fi. This took several hours and many attempts. We finally called support and after a very long hold time the tech took about 30 minutes to get the 2 units synch’d to Wi-Fi. Despite having full signal (3 bars) on our cell phones, tablets, and computers in these rooms, the mini split frequently loses the Wi-Fi signal or the app does not respond. Nice idea but very poor performance!

— LDG7387

★★★★☆ Canada · v3.4.0 · 11 Feb 2025

Works Fine

The app is a little finicky to initially get set up in the Interface is clunky. I think that process could be smoother and more clearly written in the instructions. I’m an engineer and I don’t find them easy. But once the app is connected and registered, it works fine. When I’m travelling I often turn the heat pump up and down and on and off even when I’m in another country. So it does work. The current version of the app is very touchy when it comes to turning up or down the temperature and often when you hit the up and down arrows, it doesn’t work very well.

— StGuyNS01

★★☆☆☆ United States · v3.4.0 · 3 Feb 2026

Terrible

Had the app for many years, about a year ago all of my units disconnected and now I cannot reconnect them you think from 52 billion dollar company we could get a lousy app that works.

— No TDS here

★★★☆☆ Canada · v3.4.0 · 25 Mar 2026

Problème with timer

When Time zone changes +1 hour in March, all the settings in the timer program advances by 1. This is not correct, they should not change.

— bigtalljc

★★★★★ Canada · v3.2.0 · 5 Dec 2020

Great App and so Useful !

This app is so useful, thanks for the great work! We really enjoy its simplicity and the possibility to set up multiple time schedules!

— Sempremac

★☆☆☆☆ United States · v3.4.0 · 21 Feb 2025

terrible app

App is very simple to use, except many problems. Constant errors involving Wi-Fi communication. Randomly stops working and remote unit comes with is impossible to use with million of buttons. Obviously, with all these bad reviews Fujitsu needs to update the system.

— rackattack93

★★★★☆ United States · v3.4.0 · 18 Nov 2023

Incredible ease of use and control

I can now control the temperature and fan speed for my mini split from both my iPads and my iPhone, and am completely delighted. from upstairs, I can turn down the heat for the whole house at night or warm it up in the morning. Thank you Fujitsu!

— Hondoe1950

★★☆☆☆ United States · v3.4.0 · 31 Dec 2025

Works…. Barely

Always have to relogin to the app and it doesn’t work with apples keychain hardly at all making it super annoying to use regularly. Clunky, slow, needs an update.

— Moof_the_dogcow

★★★☆☆ Canada · v3.4.0 · 21 Feb 2024

Difficult to configure but works in the end

Massive pain to configure WiFi. After several tries with iPhone to configure WiFi in Manual mode managed to get the WiFi setup using iPad. After that it threw an error and needed to go back to register the unit via Easy Connect (but not using WPS since WiFi is already set up at this point). After this it worked like a charm :/

— WehrmannEh

★★★★★ New Zealand · v3.1.0 · 14 Jul 2020

Great app considering previous reviews

This app has lots of bad reviews but I think they may have made massive changes to the app since then as for me it runs perfectly. I’m kept logged in at all times so no having to enter my details in the middle of the night to make changes. I like that I can see the current actual temp as well as the temp I have it set to.

— kelzbobelz

★☆☆☆☆ United States · v3.4.0 · 4 Jan 2025

Signs out too often

App signs me out almost every day, seems random. Pretty annoying.

— Littt

★★★★☆ United States · v3.4.0 · 15 Feb 2023

No problems

My AC guy installed a Fujitsu unit in my newly constructed sunroom. After a week of using the app to control my new hvac, I’ve had absolutely no issues. It works as a thermostat should. That said, I do find the overall capability of this app to be extremely limited. Fujitsu should really consider adding features similar to Nest. I have Nest thermostats in other parts of my home and the accompanying Nest app is very functional and feature intensive. So does Fujitsu app function as a regular old thermostat? Yes. Is it all it could be? Absolutely not.

— goku99

★★☆☆☆ United States · v3.4.0 · 3 Jul 2024

Ancient app

It’s a shame Fujitsu doesn’t devote any energy to improve this app. I’ve seen one update in around 4 years. I have to relogin every few days; it doesn’t even cache my user id. This is frustrating when I’m bleary eyed when I wake up and have to read and type just to turn on the heat. Scheduling features are poor compared to any current app for other resources in my home like Kasa switches, Schluter warm floors, or Bosch washer/dryer., which do periodically update their apps because they care. If I can use facial recognition to log into my more important banking apps, shopping apps and not have to retype my user id and password every few days, Fujitsu could do better if they cared to. It’ll show me current settings and let me change temp remotely, so that’s why my review is higher than one star. But compared to capabilities of many other home resources, it’s shamefully lacking and backwards. Think twice and review other brands’ apps before buying a Fujitsu home appliance. I wish I had.

— m1234567890123456789

★★★☆☆ United States · v3.4.0 · 12 Jun 2022

Getting better, still needs work

In the 2 years we’ve been using it, they’ve made great improvements. Setting up individual schedules is pretty straightforward. That’s generally ok for us because our contractor hasn’t been able to calibrate our mini splits so they all need to be on different temperatures and we keep many of them off during the day or night. The downside is when you want to turn them all on/off/minimum heat you have to do each individually. My biggest remaining gripe is that if you’ve put your phone in airplane mode (at night for example) and you’ve either forgotten the app open or make the mistake of opening the app to say, lower your bedroom temp, it erases all your minisplit names and grouping. Argh! Please, please, please change the app to check whether the user is online first. If it’s not, don’t try to connect with any of the mini splits.

— Weeble62

★★★★★ Canada · v3.1.0 · 10 Jul 2020

Perfect app

Really happy with this application, I can manage everything from outside to ensure that I have the perfect temperature at home. No bugs, easy to use !! Seriously, you need to maintain this...

— fadialkurdi

★☆☆☆☆ United States · v3.4.0 · 23 Nov 2024

Absolutely horrible

This app is horrible, Fujitsu should be ashamed of itself. Spent over 45 minutes trying to get it to work. Then, Fujitsu’s website states it’s open for telephone support 8-8 est. (it does NOT states what days it is open). Shame on you Fujitsu!

— LDG4123

★★★★☆ Canada · v3.4.0 · 23 Sept 2021

Application correct

L’application fait ce qu’on lui demande. On est souvent obligé de se reconnecter. Un petit bogue au niveau du login, quand on entre le nom d’utilisateur/ mot de passe avec un gestionnaire de mot de passe, l’application envoi un message d’erreur que le mot de passe n’est pas assez long.. On doit ajouter un espace et l’effacer pour qu’il considère le mot de passe.

— Wadga

★★☆☆☆ United States · v3.4.0 · 30 May 2023

Nightmare to configure on IOS 16.5

Just installed this May 30 2023. The process for registering newly installed UTY-TFSXW1 Wi-Fi modules for newly installed ASYG12KMCC and ASYG09KMCC units is a nightmare due to a combination of errors in the documentation and bugs in the app. The documentation regarding the button presses on the remote control for initialization of the Wi-Fi module just seems wrong, pressing the indicated buttons never resulted in the display on the remote showing what the doc said it should. But I noticed that the orange Wi-Fi indicator on the module was blinking and the module was broadcasting the Wi-Fi network it was supposed to so I just skipped to the part about switching to that network in the iOS settings. Connecting to the module’s network causes an error pop up which prevents you from choosing your actual network from the list of available Wi-Fi networks. The doc says to just press ok but when you do so the app disappears and you can no longer choose your network. After a lot of very frustrating attempts to redo the registration steps I discovered that by switching to the iOS settings app, doing nothing and then switching back to the FGLair app seems to be a workaround to get the app to show the list of available Wi-Fi networks and this allowed me to choose the network and continue. When you finally get to the point where the app is initializing the AC unit it takes FOREVER and the whole time you are certain that it is hung but eventually it FINALLY completes. The good news is that once registered the app seems to control the AC unit very responsively. I had 4 of these to do, 2 down and 2 to go. Fantasizing about cruel and unusual punishment for whoever allowed this stuff to ship and whoever is responsible for not updating it to work better.

— "EveryNickNameIsTaken" - taken

★★★☆☆ Australia · v3.4.0 · 30 Dec 2021

Needs Sleep Timer Function

I use the sleep function a lot through the hand held remote control, however, for some reason the app doesn’t give you any access to the Sleep Timer function. I couldn’t be bothered having to set up the weekly timer for a sleep function as it’s too convoluted. Can developers please add the Sleep Function to the app in the next upgrade. Thanks.

— sleepless home

★★★★★ Australia · v3.0.3 · 4 Jun 2020

So much for Quarantine? It works well

I purchased a Fujitsu ASTG34KMTC in august 2019 and was told that WiFi was not available as the UTY-TFSXXF3 adapter was in quarantine. I phoned Fujitsu technical support on a regular basis and received the same answer last Monday 1/5/20 about ten minutes before Harvey Norman phoned to tell that the adapter had arrived. I downloaded the app installed the adapter and connected the air conditioner to my iPad, iPhone and Google Home. The app works well. It was worth the wait

— bobworth

★☆☆☆☆ United States · v3.4.0 · 10 Oct 2024

0 stars would be more appropriate.

This morning the app decided to remove the names and groupings for all of my units. Now i just have a list of unintelligible numbers. The unfortunate thing is that i am not home and had hoped to turn one room off but now have no idea which one that is. If you intend to get heat pumps and want to control them remotely, DO NOT CHOOSE FUJITSU.

— fprefect

★★★★☆ Canada · v3.3.0 · 3 Aug 2021

Excellent app, but needs FaceID

I love this app, but it disconnects from time to time and to be able to log in via FaceID would be a time saver. The UI does the job. Everything is there and works perfectly so I don’t think it needs to look better. It’s an app that you use a lot in the beginning and when you get used to the heat pump yoo just set the timers and forget it.

— Drrex

★★☆☆☆ United States · v3.4.0 · 22 Oct 2022

Cannot set min heat lower than 60F

I am very frustrated that I can not set the minimum heat lower than 60. We spend many cold months away and would like to have our house set at 50. We are in New England so 60 is too high for no one being in the house. We would like to set it to 55 or 50 but 60 is the lowest it will go. Our NEST app works EXTREMELY well and allows for a minimum heat. The FGL External WIFI device is a big waste of money if app can’t have this lower temp feature. Also it would be great if we could see the actual temp of the room. There hasn’t been an update in a long time.

— Adventure90

★★★☆☆ United States · v3.4.0 · 5 Oct 2021

Needs current temp

Hello, the app should show current temp of the room, and then the setting of the heat so you can change it accordingly. App setup was a bit of a nightmare- the instructions were pretty much what one, and things would sometimes work and sometimes not. Once it was setup, fairly smooth sailing, but I’m wishing for the current temp to show.

— somebodyweusedtoknow

★★★★★ United States · v3.0.3 · 1 Jun 2020

Works fine

Once it start talking with a head unit you can control it with no issues.

— Viik22

★☆☆☆☆ United States · v3.4.0 · 25 Sept 2024

Stopped working after iOS update

Stopped working after ios18 update fix please

— Hehdjdjdbeh

★★★★☆ Canada · v3.2.0 · 2 Jan 2021

Works Great After Setup Pains

It was a real pain connecting the app to my mini split. A combination of the instructions on the app and the instructions provided with the mini split worked in connecting the app to the mini split. I love all the options to control my heat pump. Plus, being able to check the temperature while being away from home and turning on the mini split while away from the house is really convenient.

— HobbyGlenn

★★☆☆☆ United States · v3.4.0 · 1 Oct 2021

Needs HomeKit support!

Or at least Siri Shorcuts - pleaseeee!

— V. DePonto

★★★☆☆ United States · v3.3.0 · 19 May 2021

Bare minimum

It does the bare minimum for me well. I want to turn it on and off and adjust the temperature. But why oh why do you kick me out and make me log in every week? Please add an option where you can be permanently logged in

— 8282polsky

★★★★★ Belgium · v2.2.23 · 18 Nov 2019

Fglair General

Application complète et fonctionne correctement. Surtout la programmation est très utile

— Kaelito78

★☆☆☆☆ United States · v3.4.0 · 9 Sept 2024

Is this 1975?

The App is recommended for 4 year olds and up, but I think a 3 year old wrote the App. The unit works a treat. The App and the manual clearly never were Beta tested.

— Nihikai_kid

★★★★☆ Australia · v3.2.0 · 19 Dec 2020

Fairly good. Could do with watch app

Works fairly well. Good for turning on aircon at home when leaving from work to cool house down in advance. Would be great for an Apple Watch app to be released so can turn on in advance of leaving public swimming pool where you don’t take a phone.

— Notalwayswhinging

★★☆☆☆ United States · v3.3.0 · 21 Apr 2021

Functional but very troublesome

App works but there are continuing conflicts with the remotes. System sometimes seems to honor one and not the other. Remote doesn’t always reflect what I’ve done on app. Have repeatedly had to reboot whole mess to get things synced again. Mostly but minimally functional app.

— Mammonist

★★★☆☆ Canada · v3.2.0 · 2 Feb 2021

Sécurité de connexion de l’apps est désuet

L’application ne fournit pas un interface des plus convivial mais ça fait le travail et on s’y habitue. Cependant il est inconcevable en 2021 de ne pas pouvoir s’identifier avec le « finger print » ou le « face id ». C’est très frustrant, surtout en voiture, de réentrer notre identifiant et mot de passe pour démarrer notre système de climatisation/chauffage. Si on veut faire croire aux clients que leurs appareils fonctionnent à partir d’une application, il faudrait s’assurer de la faire évoluer.

— M2.A

★★★★★ Italy · v2.2.21 · 11 Apr 2019

Molto meglio!

Molto meglio. Può ancora migliorare ma 5 stelle di incoraggiamento!!!

— Gatsu-originale

★☆☆☆☆ United States · v3.4.0 · 12 Aug 2024

Worst app I have ever used

This is the worst app I have ever used in terms of functionality. I have tried to pair my AC with it over and over and over following the exact directions from this app on the website and I cannot get past registration. My own Wi-Fi is picking up the AC, but it will not register therefore I cannot even use any other apps as a workaround like Alexa to try to use the AC this is absolutely ridiculous for system that is $3000. If I could give this zero stars I would and there’s no way to even contact anybody via email about how bad this is and Fujitsu just doesn’t answer.

— Pssttt. its Jaay

★★★★☆ Canada · v3.1.0 · 17 Aug 2020

Works well for me but missing functions

The app has been working well for me most of the time. One of my indoor units has lost communication twice and reconnecting was possible with some effort. What I find would be a great function for me is being able to set fan speed in the timers. I would like to be able to get it to automatically go to quiet in the evening (as the unit is in our bedroom) and go back to high or auto in the morning to heat or cool the rest of the floor during the rest of the day. Same with our dining room unit: high during the day to circulate cooled or heated air throughout the floor and automatically back to low or auto at night. It should be possible, it can be done manually remotely through the app, it should be simple enough to add it in the timers settings.

— Benoit from Canada

★★☆☆☆ United States · v3.2.0 · 18 Mar 2021

Needs much updating

The app is intermediate with connection to the actual unit. Great if you want to turn unit off/on or set temp. Otherwise it’s a waste. The app only shows the current temp of the room when you hit the refresh button and then it goes away. It should be there all the time without having to ask the unit to retrieve it. Also, you don’t know if your unit is running or what stage it is in. It would be nice to know when the unit is running and what stage it is in. I wish I could use my ecobee thermostat. Their app and functionality is awesome. Please Fujitsu app makers......please make it better.

— Savastra

★★★☆☆ Canada · v3.2.0 · 19 Jan 2021

Always have to log in

The app is good, but always disconnects. It doesn’t do that on my Samsung phone. I wish the developers would include print recognition as in the Samsung version.

— Sylvester The Red

★☆☆☆☆ United States · v3.4.0 · 4 Aug 2024

Fujitsu AC app

Very hard to understand. I couldn’t get the app to register to the AC unit. Attempted for over a year. If WIFi is important to you don’t buy Fujitsu

— Smoke@39

★★★★☆ Canada · v3.0.3 · 8 Apr 2020

Good app but a bit quirky

Works well most of the time for my 2 heat pumps. It occasionally make me re-enter my account credentials. I wish it would remember them or ask for a thumb scan. Also when requesting the actual room temp, it sometimes takes multiple tries for something to come up and sometimes produces an error. Other than that, it works well and is intuitive. I had no issues setting it up.

— DP10199

★★☆☆☆ United States · v3.2.0 · 13 Feb 2021

Needs much improvement

If you are just wanting to know what you have your thermostat set on or you want to turn your system off from your couch then this is a five star app! At best it is clunky and not easily understood. The scheduling is perhaps the worst I have ever seen and the app doesn’t address the halcyon inverter series of “heat pumps”. Setting up the connection was nightmarish and you can not change the name of the system. I think in time if Fujitsu listens it will be better. But for now it’s just meh. However don’t let the app sway you away from the system itself. It is an amazing deign and energy efficient and quiet! Our house is more consistent with temperatures and we don’t find ourselves in cool or warm moments. Hopefully Fujitsu will develop a way to zone off these new systems.

— Joerescue1776

★★★☆☆ Canada · v3.1.0 · 4 Sept 2020

Login options

Please add FaceID and/or TouchID support! Having to log in and enter my credentials every time defeats the purpose of this app (should be as easy as using the wireless remote, not more complicated). Thanks

— Desphils

★☆☆☆☆ United States · v3.4.0 · 8 Jul 2024

Alan

Frustratingly and unnecessarily poor application. Can’t even tell you the current temperature. Remotes don’t update when app actually works. Password protection won’t accommodate face rec or fingerprint. Manual is useless. Basically junk.

— AnotherAMR

★★★★☆ United States · v3.0.3 · 28 Mar 2020

Works well but needs support for Minimum Heat mode

Installed the WiFi remotes into our 36btu indoor Halcyon wall units, which took some time since it was my first time removing the covers from them, but went ok. I was able to get the remotes connected to the Wifi router easily, and the app was able to find them and register them. So far (only been a couple days) it’s working well. I especially like the fast feedback on the status of the units, like if someone manually changes the temp or mode with the IR remote, I can see the changes in the app. From reading the reviews I wasn’t surprised that the app doesn’t support Minimum Heat mode (temp below 60), but I was shocked to discover that after connecting the WiFi remotes, Minimum heat mode no longer works at all, even with the IR remote! This is a problem for a function hall that’s only used occasionally. **Update 4 weeks later** I added a star because after 4 weeks I haven’t had any problems and everything is working the way it should, managing 2 remote Halcyon 36k BTU systems. Also I found a work-around to the lack of support for temps below 60 degrees: Using the instructions in the installation manual, I recalibrated the thermostat 10 degrees lower. This resulted in set temp effectively at 50 while set to 60. The only downside is that you have to turn the heat up to 80 degrees to bring the interior up to 70.

— Samchez g

★★☆☆☆ United States · v3.2.0 · 1 Feb 2021

Unreliable Connectivity - 0 Analytical Info

This app is about as basic (and shoddy) as they come. As others have commented it is a very frustrating experience to complete the pairing procedure, and after that you can look forward to random issues with app connectivity/WiFi control of your units. Something I didn’t realize we’re missing is analytical data. Ex. How much electricity is being used at a given point as well as historical trending. Fujitsu, if you’re listening....step your game up with this app.

— Generally Grumpy

★★★☆☆ Australia · v2.2.11 · 15 Aug 2018

It was good, until.....

I had my aircon for about a month before the last update, and the app seemed to work fine until then. The new version looks the same but now I have to sign in every time I open the app. So if You just want to do something simple like change the temp, or turn it on. You have sign in, which involves typing all the relevant info in. This is an annoying oversite, since you pay extra for wifi, which is now less convenient than a standard remote. Also since the update my aircon won’t turn on as scheduled on Monday mornings, just Monday mornings. I’ve tried reprogramming but it still doesn’t work. I assume these glitches will be fixed. But diner better than later would be good. IN RESPONSE TO DEVELOPER. The AC unit is set to time zone Sydney (setting in app). My phone is also set to Sydney. I programmed the timers on my phone whilst in the same room as the AC. Th AC turns on and off at the correct time every other day of the week. It also turns on and off at the correct time Monday afternoon. It just doesn’t turn on Monday morning. This implies to me at least that the Timezone is correct. Would be happy to email directly with your support if you can provide an email address.

— panda_japanda

FGLair FAQ

Is FGLair free?
Yes. The app is free, in all 71 countries it sells in, and it sells nothing inside it.
Does FGLair have a free trial?
No. None of its offers (US) come with a free trial.
What are the best alternatives to FGLair?
ViCare (4.5 from 154,974 reviews, premium from $3.99), Intesis AC Cloud (4.3 from 11,963 reviews) and Comfort by Mitsubishi Electric (4.2 from 8,811 reviews).

FGLair download

Last updated 3 months ago.

FGLair sells in 71 countries. It was released 10 years ago, on 17 Nov 2016. It holds a 1.8 rating from 662 reviews.

Supports 10 languages: English, French, German, Greek, Italian, Portuguese, Russian, Chinese, Spanish, Turkish.

How much does FGLair make?

Third-party estimates for the last 30 days, worldwide — not the store's own figures, which Apple publishes for nobody.

Revenue < $5,000
Downloads < 5,000
Open the full FGLair analytics Revenue and downloads month by month, all 71 countries split out, and every product's share and trend