VELUX ACTIVE with NETATMO




How much does VELUX ACTIVE with NETATMO cost?
Prices are current as of 7 Nov 2026.
VELUX ACTIVE with NETATMO has no in-app products on record in the United States.
10+ alternatives to VELUX ACTIVE with NETATMO
![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | |
|---|---|---|---|---|---|---|---|---|
| Rating / 5 | 4.1 | 4.1 | 4.6 | 4.3 | 4.4 | 3.9 | 4.2 | 2.4 |
| Reviews | 7.2K | 127K | 50K | 22K | 19K | 11K | 3.4K | 1.2K |
| Released | 2018 | 2021 | 2015 | 2015 | 2021 | 2018 | 2023 | 2021 |
VELUX ACTIVE with NETATMO reviews
4.1 out of 5, based on 7,235 reviews.
What people like
- Easy to set up quickly
- Control windows from anywhere easily
- Great for managing roof windows
What they complain about
- App keeps losing internet connection
- Support team is unhelpful
- Setup process is confusing and buggy
Very Pleased
We recently had solar powered windows and blinds installed. Not wanting 4 separate controllers we bought a Velux Active with Netatmo system. Easy to install, configure and operate - even I managed it!
Non functioning gateway with no response from Velux
Our gateway has been non-functional for over 6 weeks. There has been no response from Netatmo to requests for help from the Velux engineers, and no alternative suggestions
Tut was sie soll, aber es gibt noch Optimierungspotenzial
A) Vereinfachte Uhrzeit-Auswahl: Die Auswahl der Uhrzeit könnte deutlich komfortabler gestaltet werden. Aktuell muss man durch eine lange Liste scrollen, da die Zeiten im 5-Minuten-Takt aufgeführt sind. Eine separate Auswahl von Stunde und Minute – wie man es von iOS an vielen anderen Stellen gewohnt ist – wäre hier wesentlich übersichtlicher und schneller. B) Zeitprogramme sollten den aktuellen Rollo-Zustand berücksichtigen: Wenn für einen Rollo ein Zeitprogramm eingerichtet ist, z. B. morgens zu einer bestimmten Uhrzeit „Rollo öffnen“, sollte dabei der aktuelle Zustand berücksichtigt werden. Beispiel: Ich wache früher auf und öffne den Rollo bereits manuell über die Fernbedienung. Wenn später das Zeitprogramm zum Öffnen ausgeführt wird, passiert aktuell offenbar trotzdem eine Aktion – in meinem Fall wird der bereits geöffnete Rollo wieder geschlossen. Wünschenswert wäre eine Zustandsprüfung vor der Ausführung des Zeitprogramms: Ist der Rollo bereits offen, sollte ein programmierter Befehl „Rollo öffnen“ keine Aktion auslösen. Entsprechend sollte bei einem bereits geschlossenen Rollo ein programmierter Befehl „Rollo schließen“ ebenfalls nichts weiter tun. Insgesamt funktioniert die App, aber gerade diese beiden Punkte würden die Bedienung und Zuverlässigkeit der Zeitprogramme deutlich verbessern!
Zustand Fensteröffnung stimmt nicht
Leider funktioniert der Zustand der Fenster Öffnung nicht mehr. Fenster sind elektrisch offen, aber werden in der App als geschlossen angezeigt. Selbiges für elektrische Rollladen.
Not user friendly
A real nightmare to use. I had to try renaming things several times and still don’t know what the problem was. I hope I’ve sorted it out now, but I’m not confident
Mr
Very easy to use happy with the product, thank you
DOES NOT WORK WITH ALEXA
So unusual and short-sighted of Velux not to integrate with Amazon Alexa.
Happy Dachfenster
Habe ich lange von geträumt, endlich kann ich die Dachfenster / Verschattung von überall steuern und automatisieren. Großartig! Die Montage insbesondere der Rolläden der neuesten Generation war ein Albtraum, da richtig schlecht beschrieben und anscheinend auch keine Schulung für Dachdeckerbetriebe, aber anderes Thema. Was mich stört, ist, dass ich keine Push-Nachrichten erhalte, wenn sich Fenster öffnen oder schließen, obwohl überall aktiviert. Dafür 1 Punkt Abzug.
Good when it works
Disconnects at least once a day even though the gateway is less than 3 metres from the router and in the same room. Netatmo conditions inaccurate at my location stating cloudy when there wasn’t a cloud in the sky all day so my sun shutters remained open.
Katastrophales Setup
Nachdem wir erstmal das unmögliche Setup hinter uns hatten, funktionierte die Einbindung unserer über zehn Jahre alten Dachfenster in Apple HomeKit dann doch. Wir konnten die Geräte aus der Fernbedienung KLR100 tatsächlich übertragen! Die Einrichtung des Gateways muss über die App laufen. Ohne die (und ein Konto) bekommt man zwar die Gateway-Bridge eingerichtet, aber nicht die Geräte. Sobald die Geräte im über die App im Apple Home eingerichtet sind, benötigt man die App nicht mehr weiter. Zumindest wir nicht.
Great product and I want more
These are simply the finest skylights made… or roof window, if you must! I wish the auto close function gave an infinite choice for how long it should stay open. Also, hoping for Matter integration in the future. An exterior thermometer coupled with the interior thermometer, and some smart functioning could make this a very powerful system.
Easy to set up apart from the sensors
Easy add to HomeKit. Easy port from the VELUX controller. Impossible to add the VELUX sensors.
Immer noch kein Querformat für Tabletts und...
... es wäre schön, wenn die Fenstermarkisen bei Regen automatisch einfahren würden
Entwicklung vor Jahren stehengeblieben
Ich nutze die App jetzt seit 7 Jahren, wir haben 6 Dachfenster, teilweise mit Rollos und Markisen. Gateway ist teilweise neben den Geräten 5 m Luftentfernung. Trotzdem sind die Geräte häufig nicht erreichbar. (Gateway zeigt vollen WLAN Empfang) Die Verbindungen sind häufig instabil. Gateway braucht häufig mehrere Minuten um die den Zustand der Produkte zu aktualisieren. Regensensor sind viel zu empfindlich, auch bei niedriger Einstellung. Am meisten ärgert mich aber der Support der immer wieder auf die FAQ verweist und nicht wirklich eine Hilfe ist. (Hilfe Hinweise wie das Produkt ist möglicherweise vom Strom getrennt, sind so banal fehlgeleitet, dass man es sich nicht vorstellen kann) Nahezu überall werden Auszüge aus der Bedienungsanleitung zitiert. Wirklichen Support stelle ich mir anders vor! Signalstärke zwischen Fenster und Gateway ist nicht erkennbar. Automation, die sich überschneiden, werden nicht automatisch angepasst. Fenster schließen sich bei Nachtkühlung im Zeitfenster, obwohl die Räume noch zu warm sind. (Außentemperatur Luftfeuchtigkeit etc. Wäre lüften, auf jeden Fall noch weiterhin sinnvoll) Das Produkt hat sich seit 7 Jahren nicht weiterentwickelt. Wirklich schade
Gateway loses connection to server
UPDATED 08/2026 Through trial and error adding and removing automations it appears that having too many associated to one room causes the gateway to disconnect. I’ve also added a smart plug to the gateway so I can reset it from my phone | The app worked perfectly for the first six months then the problems started. It now loses connection to the server on a daily basis. Automations don’t happen as programmed and some of our windows won’t connect to the app. As others have said this app is not fit for purpose. Don’t bother with UK technical support as they will waste your time. The app redesign is also a mess
Good
Easy to setup and use
Home is locked
Our area had a power outage. Now the app tells me it’s locked. I can’t find where to reset. Ridiculous and dangerous. Thank god I don’t have door locks.
John R
My Venus roof windows and blinds have been installed for 10 years now and work perfectly. Just added a Velux Active module and set it up in 30 minutes brilliant product😊
Mangelhafte Software
Nach Einrichten verliert das Gateway seine Konfiguration und muss neu eingerichtet werden.
Direkter Schalter pro Fenster fehlt
wäre gut, wenn man die fenster einfach ohne siri durch schalter in der app einzeln öffnen, stoppen und schließen könnte.
Excellent🥰
Just had a lovely engineer helping me to setup the app and gateway and pairing all windows to the app. He was so patient and listening. Happy that I can manage all windows from my phone.
Constantly disconnect from router
Always disconnects after a few days - had it installed for a year but last few weeks it’s constantly disconnecting. Only device out of 60 on my WiFi network that disconnects
iOS App Gets Stuck Registering New Sensors
Issues adding a sensor to the gateway. The app hangs on the Registering screen. I tried multiple times, reset the sensor, and even let it sit for more than 10 minutes, but it never completed the registration. After numerous failed attempts, I tried using the Android app instead, and it worked immediately. The iOS app definitely needs debugging.
Poor App
This app is average at best, even when it is working. Lacks basic features: There is no option to set custom scenes. For example, you cannot create a preset to open only 6 out of 10 windows in the house simultaneously. Frequent connection drops: The app regularly loses connection to the servers, throwing a false "gateway not connected to the internet" error. Flawed connectivity logic: The gateway is actually connected to the internet. If I manually operate a window using a physical remote, the app suddenly wakes up, reconnects, and responds again. Missed opportunity for local control: The app desperately needs to support local control when you are on the same Wi-Fi network. While cloud servers make sense for remote access outside the home, local operation should be seamless, instant, and independent of external servers. The underlying hardware concept is great, but the software execution falls short.
Sehr hoher Leistungsverbrauch (iOS)
Siehe Titel
VELUX Active
What a smashing piece of kit. You seam to have thought of everything. (Hang on the windows could do with a wash) you didn’t think of that did you!
Dave W
Pretty bad. Difficult to use. Poor
Much more convenient
Got the VELUX Gateway for free by post just by downloading the app and enjoying the convenience of controlling my skylight that way. Only slight criticisms are it should be made clear when installing the gateway that you cannot plug it into an extension lead, direct socket only or it won’t connect; and the app should be able to display in landscape format as well on iPads, not just portrait. Minor quibbles only but room to improve.
What Changed??
App used to be reliable and consistent. Errors almost every time I log on. Drops various skylights. Server error? What? Really? All other automations in my home work fine so it’s not my system. HELP.
Automatisierung unnötig kompliziert
Automatisiert ist ja schön, aber wie kompliziert will so ein Menü denn bitte sein? Hier noch einmal, da nochmal ein Unterpunkt, Uhrzeit wenn man einstellen möchte fängt immer bei 0 Uhr an, auch wenn man gern nur 5-10 Minuten verschieben möchte unendliches gescrolle, dann bestätigen das man bestätigt hat, wenn man falsch zurück geht, alle Einstellungen dahin. Man kann keine Räume zusammen fassen, jedes Gerät muss einzeln eingestellt werden. Ohne das teure netatmo System ist man völlig am ar…. Einmal mit Siri gesteuert, hängt sich jedes Mal die App auf, das ist super nervig, dann geht erst mal gar nichts mehr bis man alles neu gestartet hat. Ich wünschte mir man könnte den Regensensor leichter übersteuern wenn man trotz Regen mal kurz 5 Minuten lüften möchte. Es nieselt und man übersteuert und dann geht nach 30 Sekunden Fax Fenster trotzdem wieder zu… Super nervig. Eingestellte Automationen müssten viel leichter und schneller zu ändern sein. Würden mit netatmo nachts die Fenster nach einem kurzen Regen wieder aufgehen?!? Wenn’s danach zu bleibt, lohnt sich die Anschaffung von Netatmo direkt noch weniger…. Der einzige Mehrwert ist das ich es selber aus dem Urlaub im Ausland zuhause ansteuern kann… cool wäre noch wenn die Dachfenster Rollos bei Regen auch automatisch aufgehen würden…. Jeder weiß das die Versicherung bei Hagelschäden nur die Fenster ersetzt, aber keine Rollläden…
Just Brilliant
Love our gateway which we use to control our Velux windows - easy to setup and simple to use with great features
R Duncan
I'm unable to add a second phone to the app, despite following all the steps. Along with this, windows regularly fall off the system and have to be re-set and then re-added. Overall very unreliable and non user friendly.
Fails to connect on latest update
See title, fails to connect on latest update, was intermittently Working after the update and today it can’t connect/open anything at all.
Products won’t register
I’ve got 2 windows, 2 blinds, 2 shutters. I have these all set up on Velux touch ok, now want to add them to Velux active. They won’t register either as individual products or via Touch, despite following the instructions. The help available on the App is very limited and I’ve now exceeded the limit of my patience.
Grundfunktionen ok, aber wichtige Sensordaten fehlen
Die App funktioniert grundsätzlich zuverlässig. Öffnet und schließt die Dachfenster. Mich stört, dass weder Akkustand noch Regensensor angezeigt wird. Der Akkustand ist bei einem Solarbetriebenen Motor essenziell. Ich habe Motor mit einem KIG 300 Gateway angebunden.
Good app, must have for VELUX windows
Allows to control your windows from anywhere
Not working.
Almost impossible to get this app to work. It has taken days for the Velux Gateway to connect, but still trying to complete finish. Without the finish complete I cannot add the accessories - window and blind control. Over a week now and no further forward.
Scheduled automations are off by 1hr
I had a few scheduled automations set up that were working fine. Recently noticed they weren't working as expected; now the automation happens precisely 1 hour after it is set to. Annoying bug aside, everything is ok.
Poor App and Gateway
The whole remote system is poor. They claim it can’t work with Alexa due to Alexa not having a window function, but I can open/close many things with Alexa without it being specific to the device. Set up is clunky at best. The HomeKit integration is poor. Really better off just using the manual remotes that come with the skylight.
Luft nach oben
Geringste Öffnung ist mit 30% voreingestellt Warum kann die geringste Öffnungsweite nicht bei 5% oder 10% für Spaltlüftung beginnen. Hier nimmt VELUX dem Erdkunden unnötig etwas vorweg. Zweite Anregung: warum lässt sich der Flüstermodus nicht weiter verlangsamen damit es wirklich „Flüstert“ wenn die Fenster öffnen/schliessen…? Insbesondere bei Regen würde ich gerne selber entscheiden ob der Flüstermodus aufgehoben wird. Seit dem letzten Update ist die Nachtauskühlung nicht anwählbar
Runningman
Works a treat & has done for 6 + months on my install.
Rubbish
Just rubbish not much more to say
Love it
The app works really well love the fact that my blinds are all automated and my roof window can be opened and closed by either the App or voice command. I had a little bit of trouble setting up but that was more likely user error and VELUX provided great support for the set up not had any problems since
Sluggish and buggy
Almost all commands to the blinds take forever to trigger with a rolling wheel and there is a huge bug with automations: when blind closure is set to 80%, they actually close to 100% when automatic dawn/dusk opening /closing are scheduled. I got condensation dripping on my furniture and my hardwood floor because of that!
Good until it stops working
I was happy with this Product until i got an email telling me it had lost contact with the VELUX server, and it seems not to work Independently. Then i tried to find out how to reset it: good luck with that…am still trying: terrible online help.
So easy!
Nice piece of kit and so easy to set up and operate!
Frustrating
I cannot get the system to connect or work, was on hold to customer services for 15 mins before the line went dead! Nightmare!
Pretty goof
Works. Is stabile. Not that smooth to set up but excellent usa phone support. Skylight mechanisms themselves excellent
Please fix your timer on Auto Close Feature
I am considering returning my VELUX App Control unit because the App itself doesn’t do the main thing I bought it for: To have it close my skylights automatically after a few hours . The remote on my wall and the app, only give you 60 minutes max to automatically close the skylights. Who opens their window on a nice day and wants to close it after 60 minutes I can’t open my skylights and go to bed and have them close automatically after a few hours. I want my skylights to close on my schedule, not on the apps schedule.
Why change it?
Oh my…. Been using this app since 2019 and you’ve completely changed it. Please change it back to how it was it didn’t need changing it worked fine before
VELUX ACTIVE with NETATMO FAQ
- Is VELUX ACTIVE with NETATMO free?
- Yes. The app is free, in all 38 countries it sells in, and it sells nothing inside it.
- Does VELUX ACTIVE with NETATMO have a free trial?
- No. None of its offers (US) come with a free trial.
- What are the best alternatives to VELUX ACTIVE with NETATMO?
- TaHoma by Somfy (4.1 from 126,787 reviews), Homematic IP (4.6 from 50,017 reviews) and Home + Security (4.3 from 21,643 reviews).
VELUX ACTIVE with NETATMO download
Last updated 1 month ago.
VELUX ACTIVE with NETATMO sells in 38 countries. It was released 8 years and 3 months ago, on 5 Aug 2018. It holds a 4.1 rating from 7,235 reviews.
Supports 27 languages: English, Bosnian, Bulgarian, Croatian, Czech, Danish, Dutch, Finnish, French, German, Hungarian, Italian, Japanese, Latvian, Lithuanian, Norwegian Bokmål, Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovenian, Spanish, Swedish, Turkish, Ukrainian.
How much does VELUX ACTIVE with NETATMO make?
Third-party estimates for the last 30 days, worldwide — not the store's own figures, which Apple publishes for nobody.






