in.touch 2 edition




How much does in.touch 2 edition cost?
Prices are current as of 15 Nov 2026.
in.touch 2 edition has no in-app products on record in the United States.
10+ alternatives to in.touch 2 edition
![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Rating / 5 | 1.7 | 4.8 | 4.8 | 4.5 | 4.6 | 3.5 | 4.5 | 3.0 | 4.0 | 3.0 | 2.1 |
| Reviews | 403 | 13K | 11K | 7.5K | 4.9K | 578 | 382 | 257 | 206 | 98 | 76 |
| Released | 2016 | 2019 | 2019 | 2020 | 2018 | 2018 | 2021 | 2016 | 2021 | 2019 | 2014 |
in.touch 2 edition reviews
1.7 out of 5, based on 403 reviews.
What people like
- Setup is quick and easy
- Works well when it actually connects
- Remote control is very convenient
What they complain about
- Temperature control is slow and unreliable
- App loses connection frequently or randomly
- No useful alerts for spa status
Verbindungsprobleme
Verbindung kommt nur innerhalb des WLANs zu Stande. Von außerhalb kann leider auf das Spa seit ungefähr vier Wochen nicht mehr zugegriffen werden. Dies ist wie immer nach Updates der Fall bitte an die Entwickler den Fehler erneut wie oft zu beheben.
Never connects
The circle just spins
Works well enough
Helps me manage my hot tub remotely however the app cannot set the clock time you still need to do this manually at the control panel which looses a star for me but still very useful.
Buggy!
Like many others I purchased the wifi module for my bullfrog spa to control it while away. Especially important since it is at a vacation home and checking in on it in the winter and raising the temperature prior to heading there were the key functions I was looking for. It connects sporadically and the controls work on and off. Seems to happen when I need to change it. Disappointing since this was a $500 addition to the cost of the already pricy spa.
Temperatureinstellung via Tastatur
Bitte um Update. Schieberegler für die Temperatur funktioniert nur rudimentär. Es wäre deutlich nutzerfreundlicher, wenn man die gewünscht Temperatur direkt über die Tastatur eintippen kann. Bitte um Update!
It’s all about your WiFi
I’ve had zero issues with this product since installing. It was easy to configure with my Aquaterra spa after opening up the side panel and plugging into a port on the controller board. I left the unit inside the spa cover and did not mount externally and it’s working great. The key is good WiFi. I have a mesh system and my spa happens to be very close to one of the mesh routers, although it is on the other side of a stucco wall. The app itself is not very intuitive, I wish they would make a mode that would force the hot tub to not come on at all for the times scheduled, 4-9pm for our utility company charging the highest rates. The economy mode does prevent the heater from coming on which is nice but the pump will still run on occasion during those scheduled hours. I’m still giving this 5 stars, I’ve turned my hot tub up while experiencing back pain at Costco and it was ready to use when I got home at the temp I set it to!
Awful!
Forced to update this very buggy app, and it required me to re-login and verify my email. It said it sent an email confirmation but I never received it. Now I can’t use the app at all! I was hoping all the issues were finally fixed…. LOL!!!
Works well
It works well though can be a little slow to connect. It would be good if it could send me notifications for example when the set temperature has been met.
Often down & very limited abilities
30-40% of the time the app is down and has to be reset. The features are much too limited. Cannot verify what time the spa is set to. Most functions can only be done from the spa aside from setting the temperature and filter and econo cycles. App seems outdated and archaic.
Worked for 11 months then poof
Worked great- I love in Northern state and travel alot so need this to work. No changes to tub or router , it just plain old stopped wotking and i get an error message on the app have do e the reset numerous times to no avail. Very disappointed.
Super easy setup, exactly what I needed
This app works in combination with Gecko's in.touch 2 accessory modules. I wanted to have my spa heat itself while my solar panels are making electricity, and be able to preheat before I hop in. The app is very thoughtful and flexible, and it has worked perfectly so far.
Worst App
This is the worst and most some timed app I’ve ever seen. If it works 1 time a week, we’d be lucky. It’s ridiculous and the maker of the app doesn’t seem to care, you can’t even get in touch with them!
Works Well For Me 🤷🏼♂️
I’ve been using the app for over a week without any issues. Indoor unit is hard connected (Ethernet cable)to my router. Outdoor unit is mounted at the top outside corner of the spa. Although it’s outdoors, it’s only about 10 feet away and through one exterior wall from the indoor unit. Connectivity is consistent and I have not noticed any issues. I like being able to control the filtering times, temperature and pump switching from my phone from almost anywhere. The reminders for cleaning, water changes, etc. are nice but you can’t modify the dates. They only count down from preset durations. Installation was quick and easy for me.
It finally happened to me
The app out of nowhere stopped connecting when not on the same Wi-Fi network, so it is now pretty much useless in terms of checking on the spa when you’re away from home.
Temp control frustrating
I appreciate what this app and the controller are trying to provide. We’ve had it a couple years and can make it work. But adjusting the temperature (99% of why I got this product) can be an exercise in futility. It typically won’t adjust on my first, third or even tenth attempt. Then sometime around my 20th attempt (simply swiping the dial Up or down) it will adjust..a bit. But not to where I want it. So another 20 or so attempts later I’ll get it to move again. Lord help me if that doesn’t land the temp where I want it. You get the idea. Seems like they could simply improve that one feature and I’d give them 5 stars.
I fixed the problem
I had nothing but problems getting this app working all the time. I discovered if you get connected (and sometimes you need to be well away from the spa) there is a way to change the communication channel to the spa. Hit settings and then in.touch network and there are all the channels. I use 15 and mine now works 99% of the time when I’m sitting in the spa. Good luck
Garbage
This app is GARBAGE it has never worked right since I have had my spa. Now they want to make a new app and charge you $99 for it. They should give it everyone for free just because of this app we have NEVER working. I will never download the new app to pay money for something that probably does not work like the current app.
Works great. Hot tub control, home or remote
Works great. I can see my hot tub status and use the controls at home or remotely. Seems to be very reliable and I’ve had no problems.
Junk
Half the time it doesn’t know what the temperature is and doesn’t obey what you set it to.
Good control for spa with room for improvement
The app is ok and offers all needed functionality to control the spa remotely. I like the spa network monitoring which allows to troubleshoot connection issues and to choose the optimal channel. I also like the present profiles (away, standard, energy saver, etc.) which can be adapted for filtering and energy saving times. I‘m missing a functionality to define the „energy saving temperature. I found out, that it seems to be 26 degrees Celsius.
Funktioniert gut
Einfache Installation dank YouTube Video. Schade, dass keine Verknüpfung mit AppleWatch möglich ist.
crazy bad and a 100$ upgrafe
headline says it all, hardly ever works and an upgrade announced but it will cost $100 for the same ap. Horribly bad!
Doesn’t always connect
Often have to force quit and reopen the app to get it to connect after initially opening it. Not the most reliable. When it works, it’s pretty good. I worry about it continuing to work long-term
Temp control! There is a trick, it works!
The slider doesn’t work, to control the temp. Don’t use the slider, click on the circle and slide up and down to control the temp. Wow. Finally. But No instructions. Terrible guys.
Server connectivity issue, works on local network only
Own this for the last couple of years, so what can i say. The main issue i do experiencing is this device works on the local wifi network only. This mean when i'm out of my home on 4G mobile data i can't connect to my hot tub. I have try lots of things through troubleshooting as per manual turning off and on, restarting, resetting, opening a port 10022 in my router and ec no solution works! I didn't give up and sent a query to gecko but never received a response unfortunately. Gecko, if you read this can you finally find the solution please? If your solution is check your internet connection, my answer don't blame pls my internet connection, it is fast fibre and everything works excellent apart of in.touch.
Great for controlling my spa
Connection works normal most of the time. I typically control all filter times etc via this app. I would appreciate if it would be available for Apple Watch. The Alexa skill is unfortunately not available in Europe/Germany.
This is rough
How do you make something as simple as a programmable thermostat so difficult? UI is unintuitive with icons that make no sense.
App
Serais popir qu’il fasse une version pour que sa marche avec Apple Watch
Works sometimes… Buyer beware.
This app along with the hardware has worked intermittently for about three years. It usually took me at least a minute just to adjust my spa temperature. First the app crashes, then you open it again. Then it reconnects… Then you get an error that it’s not connected. Then you click retry. And then you have to shut down the app and reopen it. And now since the latest update it takes me about 3-4 minutes to adjust the temperature up or down on my spa. You have to press the big temperature button in the middle of the app and then frantically try to swipe up or down on a slider on the left before the slider disappears to control the temperature. Literally need to do this about 100 times to get the temperature up to 95 or back down to the lowest setting at 52. And it’s not a connectivity issue… The lights and the jets work perfectly every time from the app when it’s not crashed… it’s now just the temperature control function in the app when it does manage to work. Somehow it’s actually getting worse. And it was terrible to begin with. I made the mistake of putting the top side controller in another room with the spa equipment because I figured I could just control the spa from the app. Don’t make that mistake.
Lacks features
App works fine for me but could use more features. Alarms and notifications would be very useful.
5*
Läuft super, man kann alles genau steuern. Nur schade das diese App in Deutschland noch nicht alexafähig ist. Ich würde mich freuen den Skill „my spa Control“ hier zu nutzen.
Junk
The device and its software worked for the first month or two, but its worthless now. I spoke with technical support at one point and were able to run troubleshooting, which got it working again for a day and then it stopped working again. I’ve run the same steps over and over and cannot get it to connect with my device.
Works well for me
I have now been using this app for the last Year.. While it can be a little slow to connect it works perfectly well while I’m away from home in the tub or in the house..The only thing that I would like to amend on the app is the opportunity to schedule the lights or have them on a timer . I Would like to try and save the life of the driver being though that the lights on the hot tub cost me £250 ouch..!! looking forward to an update to sort this out.. Another little bug that irritates me if I start using the app and then take a telephone call I have to reconnect every time it will not stay logged on which is disappointing.. had this app for over a year now generally good but it’s a shame there’s been no real update to take the product further
Temperature control does not work
Temperature control does not work.
App ist ok - aber Verbindungsprobleme!
Die App ist ganz gut gemacht und auch die Einstellungsmöglichkeiten sind sehr vielfältig und gut. Das nervige Problem ist allerdings, dass ich ständig die Verbindung zum Pool verliere und das obwohl der Pool in unmittelbarer Nähe zum Router steht und ich dort auch volle Verbindungsstärke angezeigt bekomme auf meinem Handy. vielleicht kann man das ja noch irgendwie in den Griff kriegen?!
Efficace et pratique
Facile à installer! Très intéressant!
Frustrating app and frustrating company
I’ve had this since my spa was installed 5 years ago and it continues to decline. Setting temperature rarely sticks, setting “eco” times and filter run times is a neurotic and “will it? Won’t it?” experience, and worst of all there is no way to set the time manually because “the app will automatically sync the spa to your phones time”. After 5 years I will tell you it does not. I finally installed Home Assistant on a raspberry pi just to install the gecko/intouch plugin and it’s amazing. It’s responsive, it works, but it unfortunately also won’t let me set the time on the spa nor will it manage filter times. I have also had connectivity issues with the app, even though the wireless receivers are less than 10 ft away from each other (can’t run a direct Ethernet line for some reason?). I’m a network Admin so I’ve done everything right such as changing signal channels, etc — I’m convinced it’s a problem with this app, because home assistant has never had an issue connecting to the spa.
Works well for me
No problems with it really, just a minor hiccup where it thinks the spa is powered off. Refreshing the app once or twice reconnects it. Would be great if it didn’t have to reconnect after switching apps for a few seconds too. It would be good to see more power usage info especially if the air source heat pump is connected. Estimated power used today and how much the ASHP has saved in energy etc. Custom reminders (not just the reminders built in).
Lacks Alerts or Notifications
The App needs to provide a simple notification or message when the spa setpoint temp falls below a threshold or it loses spa communication to help users know their spa has an issue. Currently it provides no notifications for active spa status monitoring which is a big miss. This should be a simple update.
Humm
When the app works it works … ok.. although having set my spa to energy saver and super energy saver options the app seams to have a mind of its own and when it should have set my spa to low power mode. I check the app to find its running on full power mode.. very glitchy.
Excellent App
Read a lot of bad reviews about this app and the intouch 2. Fitted it in about 10 mins. No problems with setup. Works both at home and away. Easy to change timings and water care mode. Can even control pumps while lying back in spa.
Painful
Always saying my WiFi is off or too weak, yet I have many smart devices and they all work very well with our WiFi. Unfortunately this app is painful and freaks me out that my power is out or the hot tub is off and in fact it’s not.
Worked well.
My swimspa with the in.touch 2 WiFi controller was connected to power today (yippee!). After reading comments from other reviewers, I was worried that I would not be able to control my swimspa from remote locations. I tested remote use by leaving my home and trying to control the swimspa with my phone via 4G internet. The app worked just as well for controlling the swimspa remotely as from home. I was also able to change the temperature and change schedules which another reviewer was not able to do. So, I had none of the problems experienced by the other reviewers. In my first day of use, I have found the in.touch very useful, even at home. Firstly, I have not been able to read the swimspa’s actual controller today because the actual controller’s display is too dim to see in the bright sun. Fortunately, I have been able to use the in.touch 2 instead. Secondly, with the in.touch 2, I don’t need to go outside and lift the covers to be able to read the temperature. This makes it much easier to monitor the swimspa. That said, I think the in.touch 2 hardware is overpriced for what it is (although worth it for the convenience)
Does not operate like others
Cannot change lighting at all… all other videos I have looked at had a separate page with a color wheel. This app does not.
Set Point command via Alexa isn’t working.
The app and hardware works well to control my spa, also the Alexa interface is good although the change setpoint command doesn’t work. Would be a better interface with Alexa if it was compatible with routines, but this would be a nice to have. Any help with the setpoint command would be appreciated.
Credit where it’s due
After reviewing the fact that the last update killed the functionality of the app, I was contacted by support team and was given a timeframe in which they expected the problems to be resolved. Ahead of their predicted timescale the app was updated and the problem resolved. Cannot ask for anymore support than this from an app and it’s development team. Thanks and well done 👏🏻👏🏻
Cannot adjust temp slider
Since I have had new phone and new iOS, I cannot slide the temperature slider. iPhone 17 pro. iOS 26.2.
Works 👍👍
Great app worked no bother but not easy to control the light or pic what colour you want right from the app
No instructions on programming
There are several settings such as Standard, Eco, Weekender and Away, but. no instructions on the differences. You can assign start and stop times, but no instructions on just what that means (run continuously or don’t run any routine maintenance runs outside of those times?). What little info there is on-line is superficial and doesn’t discuss the settings.
Unable to control Spa
Since last update I am unable to tap on the pencil and change the settings. I am encouraged by the developers response today. Updates are always a nightmare where the unforeseen happens. Should be fixed soon.I have used my star rating to 3 and I am sure it will be back to 5* when fixed.
in.touch 2 edition FAQ
- Is in.touch 2 edition free?
- Yes. The app is free, in all 175 countries it sells in, and it sells nothing inside it.
- Does in.touch 2 edition have a free trial?
- No. None of its offers (US) come with a free trial.
- What are the best alternatives to in.touch 2 edition?
- Gemstone Lights HUB (4.8 from 13,286 reviews), Weiser (4.8 from 10,654 reviews) and Watts® Home (4.5 from 7,529 reviews).
in.touch 2 edition download
Last updated 2 months ago.
in.touch 2 edition sells in 175 countries. It was released 10 years ago, on 24 Oct 2016. It holds a 1.7 rating from 403 reviews.
Supports 5 languages: English, French, German, Spanish, Swedish.
How much does in.touch 2 edition make?
Third-party estimates for the last 30 days, worldwide — not the store's own figures, which Apple publishes for nobody.







