Flash Maker


How much does Flash Maker cost?
Prices are current as of 12 Nov 2026.
Flash Maker has no in-app products on record in the United States.
10+ alternatives to Flash Maker
![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Rating / 5 | 2.1 | 4.8 | 4.5 | 4.6 | 4.6 | 4.7 | 4.6 | 2.9 | 4.8 | 4.2 | 2.8 |
| Reviews | 836 | 89K | 16K | 8.8K | 6.2K | 5.8K | 2K | 1.5K | 1.2K | 397 | 183 |
| Released | 2024 | 2022 | 2021 | 2025 | 2023 | 2023 | 2017 | 2023 | 2023 | 2024 | 2022 |
| Monthly price | — | — | $7.99 | $19.99 | $2.99 | — | $3.99 | — | $1.99 | — | — |
| Annual price | — | — | $79.99 | $155.99 | $29.99 | — | $5.99 | — | $17.99 | — | — |
| One-time price | — | $2.99 | $7.99 | — | — | — | $24.99 | — | $39.99 | — | — |
The going rate for each plan in United States, in its own currency, shaded from the cheapest price on the row to the dearest.
Flash Maker reviews
2.1 out of 5, based on 836 reviews.
What people like
- Works perfectly with specific printer models
- Easy to set up initially
- Good for monitoring print progress remotely
What they complain about
- Printer shows offline even when it is on
- Login process is frustrating and unreliable
- Camera feed cuts out or fails to load
- App constantly logs you out unexpectedly
Saying it off line on app when it is
I can’t do what I need to do cause it’s not connecting to my app need help
Refuses to bind
I have been trying for the past 30 minutes to bind my account to my AD5M and it refuses every time, my phone CLEARLY says that the binding has been successful even though my printer says otherwise, I hate using this app so much and I regret buying a Flashforge printer, if you are interested in getting a 3D printer make sure it is a bamboo lab printer
I can’t log in for some reason
I’ve been waiting 20 minutes for a verification code please help
Pretty bad
Can’t even control it from the app, and the video only works 10% of the time even on good WiFi and full bars of internet.
Please read this if you’re having troubles.
Look don’t get me wrong the app is a little difficult to maneuver, but to the people who are mass 1 staring this app (you’re more than likely doing it wrong) now of course I MAY be wrong and you may be doing everything right but just in case this may help. Flashforge products sometimes likes to switch the IP it’s on (even when LAN connected) you HAVE TO make sure it is on the same IP, same WiFi, same everything. Only then it works. I almost quit this app for the same reasons as all of you people. But please take a look into your settings in the printer, computer, and phone. Make sure it all lines up, if then it still does not work it’s definitely a manufacturing error.
Really good
Super easy to set up
Useless and cannot log in
Absolutely useless app. It will not even accept my username and password. The exact same username and password works beautifully on the printer and both of my computers. But on this app, it will not recognize it at all. Did a password reset and it screwed up everything that took hours to get the printer working again, and the app still doesn't work. do not waste your time with this useless app
Meh works
Needs some cosmetic and functionality improvements with finger friendly buttons toss in the status of prints on the lock screen and in CarPlay other printers iOS app.
Works when it feels like it
Super erratic, sometimes (rarely) works great, but mostly it seems to be completely lost. It is Chinese AI developed slop, and if a human developed this then I apologize to AI for insulting you.
How can a good printer have such a low quality app?
I have used this app since the 26th December but it can be incredibly slow in terms of viewing my camera that I brought with it and trying to view what my machines getting up to that is below that of any other 3D printers app. Not to mention the Orca Slicer for printing that goes with this app for your laptop or computer is also bad because sometimes it takes a few goes to send what I want to print to my printer despite good WiFi (I had to reset it yesterday due to connectivity issues). Furthermore, when importing a model and preparing it to print Orca Slicer can stop responding relatively easy. I have had too many issues with my printer for the amount of time I have had it but have also had some wonderful prints that haven’t been too slow to make as long as I don’t use multicolour. I have the AD5X. Flash Forge, you need to update the apps that you need to print with as well as the printers. 3 stars is quite generous.
Tridentine
It’s really good for monitoring your 3-D printer and is just a good app overall
Garbage
This app is terrible, never shows my printer as online no matter what. I’m logged in, connected to WiFi and still says offline. Have yet to be able to use app even once.
Printer good app bad
I got my printer back in 2022 and it was grate and still doing good the only problem is the constant brake if of the printer but I think it’s just t 3d printing in general anyway I only just found the app a month ago after I was snooping around for something cool that has a app I might not know about then I saw it a app I got it right away to find it was garbage no offence the hi is old and in smooth and sharp I can’t log in I have up when I found the app and tried again but still nothing. update it a pretty God app I wish it looked more modern and login is really strange you have to reset you password from the current one the next day it get it to work (tip) Apple password doesn’t work for some reason
Decent
I could never get it to connect to the printer and it always brought me to different websites when trying to print
Okay app
Nice app, but please add that I can send task from my phone to the printer!
Flashforge
It is an amazing app that lets you control your printer and control some basic things.
🤮
This app is so bad. Would not let me print 500$ down the drain
NO Audio Notifications ??!!
Seriously … **** NO Audio Notifications **** Why not ?! THIS NEEDS FIXING And no … my iPhone is setup correctly!
Worked for me before…
But now it keeps on saying my device is offline even when I can see that it’s on. And yes I did make sure it was connected to the internet.
Please fix it.
Camera won’t work every time. How i can start print remotely? Not useful app
打印完成通知问题
为啥以前打印完要弹出提示,现在不弹了
It has never worked
This so has never actually connected with the printer. Tried resetting it up multiple times, uninstall/install…
Уведомления
Сделайте уведомления по окончании печати
idk
it’s kinda a hit or miss because most the time it just doesn’t say my printer is on but it is
Есть что доделать.
Камера включается через раз. Подсветка не включается. Файлы на принтере не видно.
Descent monitoring for me.
Works perfectly with my Flashforge 3M pro printer. This app allows me to monitor printing progress via camera and other data. It notifies me when slicing is completed.
Terrible
Doesn’t work
5m pro companion app
Works well for me for I am using orca-flashforge for slicing. The registration process was a bit finicky on the app, so best to do online.
Will not connect
So frustrating how one minute it connects to the printer and then stops connecting.
Бесполезно
Подсветкой не управляет, веб-камера открывается через раз, уведомления не приходят. Ещё интересно было бы файлы на принтере посмотреть, почистить.
Just register online
App works great and provides great functionality. Registering seems broken.
app is horrible
every time i print something the all always says that my printer is offline which obviously isn’t true
A few tweaks would be good
I mainly use the app for monitoring my printer remotely so it’s a bit of a nuisance if you login on one mobile device that you get kicked out of another and have to keep entering your name and password and accept the terms and conditions every time. Apart from that great!
Shop not working
Every time we click on the shop it comes up with an internal error. Can you please rectify this so we can print other things. Thanks
Итак
Номинально да, приложение есть, но работает через раз. В зависимости от дня недели, фаз луны, вспышек на солнце, может подключиться, а может и нет, может подключиться, но камеру наотрез откажется показывать. Пока сыровата вообщем.
Weird review
I don’t really get the other review saying the process is a nightmare tool me 10sec to register just like any random registration..
Fix the app
Printer works great. I use my laptop, but I would like to use the app for the time lapse videos because I can’t get them. The app never connects to my printer.
Loving it!
Loving this app! Lets me seamlessly connect and find my printer. I wish there was support for iPhone widgets (both home and Lock Screen) where you could check the status of the print! Or perhaps shortcuts integration? Otherwise I’m very pleased!
This app needs to fix itself
This app is horrible it barely helps my 3D printer and it randomly just deleted my account?!? It Ickes me out even tho I was just in in 2 mins ago and now it’s saying account does not exist like seriously it can’t be that hard to keep the data and not delete it
Can we have English translation of developer text please
I have a Flashforge Adventurer 3 - Not sure if this app will support it - seems to want a QR code to register a device. Can developer please confirm
Tut was sie soll
Zwar funktioniert die Videofunktion nicht immer zuverlässig aber sonst ist die wirklich super für den Anfang. Natürlich ist sie noch Verbesserungswürdig, aber aktuell ist sie top.
Won’t connect
Go through the instructions follow everything by the numbers. It asks to bind the machine to the app. Follow the QR code and it still shows off-line even though I’m looking at the machine doing a test print. Click on that get support and you get a 404 file not found. I hope this is not the way this is going to be.
Ok
Ok
Simple changes
Logging into the app is really painful. Firstly, the tick box to accept terms and conditions is too small and difficult to select on an iPhone. Why is is necessary to accept this every time you open the app? Once should be enough then allow the biometrics to transmit authorisation. Once connected it seems to work well but please address this basic problem
Советую однозначно!
Ребятки молодцы!) Уже догнали бамбука!)
This app sucks
I downloaded when I got my adventure m5 pro my friend has adventure 5M and we both can’t get the app to work. It will never connect to the printer. It always says it’s off-line even though on the computer it says it’s online we’ve done everything. We tried to fix this, but it won’t work.
Offline
Adventurer 5M is offline when accessing out of the local network. Printer added using QR-code
It’s okay
The app is okay, it’s sort of works. There is a lot of potential with this app if they put some logical development behind it. At the moment it constantly logs you out, the printer camera feed is unreliable. It’s confusing to set up with zero instructions on how to connect the printer to the app. There is a lot of potential for this to me as good as bambu with a little work.
Flash Maker FAQ
- Is Flash Maker free?
- Yes. The app is free, in all 175 countries it sells in, and it sells nothing inside it.
- Does Flash Maker have a free trial?
- No. None of its offers (US) come with a free trial.
- What are the best alternatives to Flash Maker?
- Bambu Handy (4.8 from 89,453 reviews, premium from $0.99), Creality Cloud - 3D Printing (4.5 from 16,377 reviews, premium from $0.99) and Tripo AI: 3D Model Generator (4.6 from 8,841 reviews, premium from $15.99).
Flash Maker download
Last updated 10 months ago.
Flash Maker sells in 175 countries. It was released 2 years and 8 months ago, on 13 Mar 2024. It holds a 2.1 rating from 836 reviews.
Supports 7 languages: English, French, German, Japanese, Korean, Chinese, Spanish.
How much does Flash Maker make?
Third-party estimates for the last 30 days, worldwide — not the store's own figures, which Apple publishes for nobody.









