Soundcraft ViSi Remote
No in-app products collected for this app.
| Rating | |||
|---|---|---|---|
| United States | 23%87 | 2.21 | |
| Germany | 8%29 | 1.79 | |
| Brazil | 7%25 | 2.60 | |
| Russia | 4%15 | 1.67 | |
| France | 4%14 | 2.64 | |
| India | 3%13 | 3.62 | |
| South Korea | 3%10 | 4.00 | |
| Mexico | 2%9 | 3.67 | |
| Thailand | 2%9 | 3.89 | |
| Turkey | 2%8 | 1.50 | |
| China | 2%7 | 2.86 | |
| Spain | 2%7 | 2.00 | |
| Australia | 2%6 | 1.83 | |
| Canada | 2%6 | 2.17 | |
| Chile | 1%5 | 3.40 | |
| Indonesia | 1%5 | 4.20 | |
| Italy | 1%5 | 4.20 | |
| Japan | 1%5 | 1.80 | |
| Peru | 1%5 | 4.00 | |
| Austria | 1%4 | 3.00 | |
| Bolivia | 1%4 | 3.25 | |
| United Kingdom | 1%4 | 3.00 | |
| Greece | 1%4 | 1.25 | |
| Hungary | 1%4 | 3.00 | |
| Norway | 1%4 | 5.00 | |
| Philippines | 1%4 | 4.00 | |
| Poland | 1%4 | 3.00 |
Description
Soundcraft ViSi Remote 3.6.2 is an iOS application that allows remote control of Soundcraft Vi, Si Compact, Si Performer, Si Expression and Si Impact mixing consoles wirelessly from an iPad device using no additional hardware other than a wireless router connected to the Harman HiQnet® Ethernet port of the console.
With ViSi Remote you are free to roam the venue and adjust mixes and other audio parameters directly from the iPad.
Applications:
Optimise the front of house mix from anywhere in the room
Set mic gains and 48V from the stage
Adjust monitor levels while standing next to the artist
Adjust channel strip settings remotely from the console
Use to extend the fader count of an existing control surface
Use in standalone (demo) mode for familiarisation with console functions
Control a network of consoles, e.g., FOH and Monitor
Provide a separate surface for DMX functionality (Si Performer only)
Allow multiple users on the same console to control their own mixes
Have a global metering overview or “meter bridge” as an extension of the console
ViSi Remote 3.6.2 Console Minimum Software Requirements:
(Latest software is available on the Soundcraft website)
Si Impact: V1.0 build 0010 or higher
Si Performer: V1.6 build or higher
Si Expression: V1.6 build or higher
Si Compact: V3.0 build or higher
Vi1/2/4/6: V4.9 or higher
Vi200: V6.4 or higher
Vi400/600: V6.3 or higher
Vi1000: V6.3 or higher
Vi2000: V6.3 or higher
Vi3000: V6.3 or higher
Vi5000/7000: V6.3 or higher
Note: For Vi & Si consoles, the latest software listed above is needed in order to access the full channel processing and metering functions. Older software versions would result in basic functionality with fader, mute, mix, and GEQ settings only.
Mute group functionality is only supported on Si V2.2 build1 or higher and on Vi V6.4.5.340 or higher.
ViSi Remote 3.6.2 iOS Compatibility:
iOS 12.0 or higher.
Functions controlled:
Channel naming
Input faders and mutes
Bus, Master LR & Mono (C) and VCA master faders and mutes
Channel strip settings, including:
Mic Gain, Digital Trim, and 48V
Phase Invert
HPF & LPF (HPF only on Si consoles)
Delay
Channel EQ with grabbable parametric EQ curve
Gate and Compression settings
Pan
LR and Mono (C) bus routing
Graphic EQs on all bus outs
Channel contributions to each Aux Mix
Channel contributions to each FX bus (Si consoles only)
Mix contributions to each matrix bus
DMX Masters (Si Performer Only)
Mute Group Masters (Requires Si software 2.2.1 or later and Vi V6.4.5.340 or higher; not supported on Si Compact; Vi1, Vi2, Vi4 or Vi6).