Smart Assist
for Evolution Wireless Digital




How much does Smart Assist cost?
Prices are current as of 12 Nov 2026.
Smart Assist has no in-app products on record in the United States.
10+ alternatives to Smart Assist
![]() | ![]() | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Rating / 5 | 3.5 | 3.9 | 3.7 | 2.4 | 2.2 | 3.9 | 3.6 | 3.8 | 3.4 | 3.3 | 3.5 |
| Reviews | 148 | 340 | 184 | 138 | 102 | 97 | 61 | 48 | 41 | 28 | 10 |
| Released | 2021 | 2013 | 2017 | 2023 | 2026 | 2023 | 2016 | 2023 | 2016 | 2020 | 2025 |
Smart Assist reviews
3.5 out of 5, based on 148 reviews.
What people like
- Super easy to set up
- Works well with digital gear
- Bluetooth range is surprisingly good
What they complain about
- Crashes and freezes on start
- Connects poorly to new devices
- Won't work on older iPads
Deleted App and It worked
This app wasn’t working at all. But I deleted the app for my iPhone and reinstalled it and then it worked perfectly. EW-D
Doesn’t work
My receivers say I need to update the firmware and I follow the instructions but it just hangs. The devices work ok, but they require constant deleting and repairing to make them work. I have to use the button on the physical units to change settings.
More Receivers Please
I have had a very good experience with the app so far. However, as mentioned by another user in a school setting I also would like the ability to manage at-least 20 systems.
Meh
It’s a bit clunky. No way to rearrange devices in app without “forgetting” and re-pairing. Not a HUGE deal until the app locked out #2 in a 12 mic system. Setup is a more time consuming process than indicated and FW updates take forever (have to update one at a time). Good idea but overall a FAIL in execution.
EW-D Channels
Warum kann man bei der Frequenzwahl nur manuell die Frequenzen einstellen. Man kann nicht die im Empfänger voreingestellten Channels auswählen. Diese sind schlicht nicht verfügbar. Schön wäre auch eine Anzeige der Empfangsstärke und des Audio-Pegels. Sonst soweit OK.
Batteriekapazitäten werden nicht aktualisiert
Hallo! Auspacken, mit App verbinden, alles einbinden etc. soweit perfekt. Nun trat aber folgendes Problem auf, nach mehreren Stunden Probenarbeit tauschte ich vorausschauend für die eigentliche Veranstaltung die mitgelieferten Batterien gegen handelsübliche, leider ist nun die Batteriekapazität nicht mehr verfügbar. Liegt es an der App, oder wo müsste ich eingreifen? Vielen Dank im voraus!
App will no longer run on iPad with iOS 12.5
Our church upgraded some of our mics to the new Sennheiser mics that use this app for setup and operation. All worked well with the church’s iPad until the app was updated and will no longer work on our iPad with iOS 12.5. Now when we start the app it tries to open and shuts down. We have updated this older iPad to the latest iOS it will support, and have deleted the Sennheiser app, restarted the iPad and re-installed the app. Nothing we do will allow the app to work on this iPad. We do understand that this iPad is a couple years old. Being a church it is not feasible to be able to update all technology when what we have still works. Would it be possible to make an older version of the app available, or make the app backwards compatible?
Good Update needs EWDX support
The original app was super simple this version require one extra step in selecting your region but other than that still works great. I wish Sennheiser would update once more for the EW-DX. Great work Sennheiser
ERRORE
Ho trovato problemi di connessione con i nuovi dispositivi EW DX
Sennheiser EW-D
It works. The Sennheiser EW-D is light years ahead of the g1-g4. With this app you can sync via Bluetooth, autoscan, adjust gain, plus some other settings. Plus the other benefits of digital. The Cons: app GUI needs a little fixing. But it works. So,I care less of design, I care that it functions.
What Were They Thinking?
I liked the old version WAY better. Please bring it back.
Update funktioniert nun
Hallo, Seit dem letzten Update funktioniert nun das Updaten meines Taschensenders. Sehr schön ! Leider funktioniert das Umbenennen meines Systems noch immer nicht. Ich kann zwar Umbenenne anwählen, allerdings verändert sich dann nichts wenn ich Eingaben tätige. Lediglich die Farbe kann ich ändern.
Endlich funktioniert es
Na, geht doch. auch wenn es noch paar Hürden gibt um die DX im WSM zu sehen. Update über ipad, hier aber kabelgebunden via Adapter, danach im WSM nur mit einem Router und alles ohne DHCP. Dann klappts auch mit Windows ;-)
App is not working
Crashes on start unable to interact with app
EW-D Smart Assist
Hallo zusammen, ich finde diese App im Grunde gut gemacht. Alles schön übersichtlich und gut einzurichten. Dennoch sind mir zwei Sachen aufgefallen. 1: Ab und zu hängt sich die App auf und man kann nur durch einen Neustart dies beheben ( aktuell über Iphone XS ) 2: Bei der Benennung der Funkstrecke zb mit eigenem Namen sind nur 6 Zeichen möglich. Ist etwas schade. Gibt es da eine andere Möglichkeit ? Danke euch :)
Spitzen App
Die App tut alles was sie soll und ist auch sehr übersichtlich aufgebaut. Die wichtigsten Funktionen sind schnell erreichbar. Auch die Integration der Bedienungsanleitungen ist klasse. Was mir noch fehlt ist z.B. das Anzeigen aller als frei gescannten Frequenzen/Channels oder dass man beim scannen einen Bereich vorgeben kann. Damit könnte man in größeren Setups die Bereiche für verschiedene System ein wenig steuern. Update Mai 2020: Ihr habt meinen Wunsch mit dem aktuellen Update erfüllt bzw. übertroffen. Ihr seid die Besten 👍👍👍 Noch eine Anregung: ist es möglich die App auch für M1 Macs freizuschalten? Dann hätte man bei einem Job alle wichtigen Apps auf einem Gerät. Nach einigen sich wiederholenden Veranstaltungen mit jeweils unterschiedlichen Setups (mal Musical, mal Band etc) vermisse ich eine Save/Recall Funktion mit der man eine komplettes Setup von allen Strecken mit Namen, Gain und Mute Einstellungen speichern und wieder aufrufen kann. Somit könnte man noch schneller z.B. bei Verschiedenen Bands alles voreingestellt haben.
App crashes
App worked when I first got the EW but now it just crash/freezes upon opening. Hopefully they can fix this soon.
Useful but with some limitations
We have just installed 20 channels of EW-D wireless in my school. Using the app is relatively easy to set up each receiver and sync the transmitters. But, you can’t add or monitor more than 16 receivers on one device. Since we have 20, that presents a problem. But, I was surprised how far the Bluetooth signal traveled in our auditorium. The receivers are in a room at the back of the stage behind a steel door. The FOH is over 100 feet away. I’m hoping they figure out a way to add/monitor more receivers on one device in the future. We are planning to add 4 more in the near future.
Für EW-D Nutzer ein muss.
Wer EW-D Geräte besitzt, sollte diese App von Anfang an nutzen. Gerät auspacken, App verbinden und dann Gerät konfigurieren, keine 5 Minuten ohne irgendein wälzen von Anleitungen. Das nenne ich mal gelungen, einfach und Kundenfreundlich. Danke für diese super App, nicht nur 5 ⭐️ sondern auch 5 Daumen hoch 👍
Does not find the device
I will zero if i can. Doesn’t do anything, won’t connect with anything
Super App
Sehr übersichtliche und zuverlässige App, jedoch nicht für das iPad optimiert und nur im Porträtmodus verwendbar.
EWDX는 언제 지원 하나요??
기다립니다 ㅠ
Your update broke it
I own 8 ew-d systems and after the last app update it can no longer auto scan from the ios app it just hangs .. not good .. worked great before
Alles fein, aber App hängt beim Anzeigen der Geräteinformationen der gekoppelten Geräte
Habe die App gerade unter iOS 15.3 auf Versionen 1.4 aktualisiert und anschließend meine EW-D CI Funkstrecke auf Firmware 1.61 aktualisiert. Das klappte alles wie gewohnt völlig reibungslos. Leider hängt sich die App bei Anzeigen der Geräteinformationen auf und funktioniert erst nach einem Neustart der App wieder. Das kann an meiner Konfiguration liegen, trotzdem aber bitte entwicklerseitig überprüfen.
Top!
Vielleicht ist es ja mal noch möglich, bei deaktivierten Muting Schalter den Sender mit der App zu muten. Ansonsten top App.
You broke it
Newest update does nothing, the screen does not respond to any touch commands. Cannot access mic systems or pair. Get it together
Great app!
Easy to use and set up
Doesn’t work with EW-DX
Was hoping it would give us certain commodities or advantages due to it being widely advertised but it turns out that my EW-DX is an ‘Unsupported device’. Doesn’t work with my system as of now.
Great app and idea!!!!
This is the kind of forward thinking we need on modern stages. Great wireless unit and companion app. One request: landscape mode please.
Won’t connect
Just like a few others have said, will not connect to receivers. Next button is greyed out for me on the connection screen.
Smart Assist FAQ
- Is Smart Assist free?
- Yes. The app is free, in all 173 countries it sells in, and it sells nothing inside it.
- Does Smart Assist have a free trial?
- No. None of its offers (US) come with a free trial.
- What are the best alternatives to Smart Assist?
- Qu-Pad (3.9 from 340 reviews), SQ MixPad (3.7 from 184 reviews) and MX-Mix (2.4 from 138 reviews).
Smart Assist download
Last updated 6 months ago.
Smart Assist sells in 173 countries. It was released 5 years and 5 months ago, on 31 May 2021. It holds a 3.5 rating from 148 reviews.
Supports 1 language: English.
