Lux Light Meter · Photometer
UtilitiesProductivity

Lux Light Meter · Photometer

Kyu-Hee Jang · released 3 Mar 2026 · Open in App Store ↗

★ 4.38 124 reviews
Unlock the split between the products, the store ranks, and how both moved.See plans

No in-app products collected for this app.

Rating
China32%404.72
Japan12%153.67
Vietnam9%114.91
Thailand8%104.00
United States6%74.29
Taiwan5%64.17
Indonesia3%45.00
Russia3%45.00
Canada2%34.67
Belgium2%24.50
Brazil2%24.50
Switzerland2%24.50
France2%24.00
South Korea2%23.00

The store shows a different set in every country

Description

Measure light properly — in lux, foot-candles, EV, or PPFD for plants — using your iPhone's camera to read the light falling on the scene.

GROW LIGHTS & PLANTS

PPFD estimated from your live reading, matched to your light source: white LED, HPS, fluorescent or daylight

DLI for a 12, 14, 16 or 18 hour photoperiod, so you can tell whether a shelf actually reaches a seedling's daily light target

These are spectrum-based estimates, not a calibrated PAR sensor. Read them as guidance for placing lights, not as lab data.

FOUR MEASURING MODES

Auto — radial gauge with the closest real-world reference shown live

Outdoor — a log scale to 100,000 lx, from deep twilight through overcast and direct sun

Indoor — 10 to 10,000 lx, from corridor and living room up to reading desk, drafting and surgical levels

Photo — EV at ISO 100 with a suggested shutter speed

HISTORY THAT ADDS UP

Every reading saves automatically, with a 7-day trend chart and plain-language insight such as "+12% vs your 7-day average"

Notes and favourites — label a reading "kitchen window 3pm" and star it

Compare any two saved readings side by side

Export everything as CSV, or share a single reading as an image

MEASUREMENT DETAIL

Kalman-smoothed readings, so there is no jitter to read through

Min, max and average with elapsed time

Log-scale range bar in Outdoor and Indoor modes

Lux, foot-candle and EV units

Calibration factor — scale every reading by a multiplier to match a reference meter you trust

WHO USES IT

Indoor gardeners and grow-tent owners · photographers and filmmakers · electricians and lighting installers · studio engineers · workplace and office ergonomics checks · industrial lighting surveys

HOW IT WORKS

Readings are estimated from the back camera's exposure, so this is a reflected-light measurement: point the back of the phone at the surface you care about and keep the lens clean and unshaded. Because it reads reflected light, a white wall and a dark carpet under identical lighting will not read the same, and very dim scenes are the least reliable. Cameras differ between models, so for absolute numbers set the calibration factor against a meter you trust.

Available in 25 languages.

Last collected from the App Store on