Zendure





How much does Zendure cost?
Prices are current as of 13 Nov 2026.
Zendure has no in-app products on record in the United States.
10+ alternatives to Zendure
![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Rating / 5 | 2.6 | 4.2 | 4.3 | 4.5 | 3.4 | 4.5 | 2.9 | 1.9 | 2.4 | 4.7 | 2.1 |
| Reviews | 605 | 1.5K | 1.3K | 1K | 565 | 501 | 481 | 455 | 153 | 126 | 55 |
| Released | 2021 | 2020 | 2020 | 2024 | 2023 | 2023 | 2017 | 2016 | 2021 | 2025 | 2023 |
Zendure reviews
2.6 out of 5, based on 605 reviews.
What people like
- Good control over devices
- Clean and simple interface
- Works well for basics
- Developers fix bugs quickly
- Great for outdoor power needs
What they complain about
- WiFi connection fails constantly
- App crashes and freezes often
- Customer support is unhelpful
- Charging time estimates are wrong
- Setup is confusing and hard
Super
Alles super, man hat alles im Blick
Functionless
The performance of this App is erratic and unpredictable. The screens frequently freeze and the algorithms are complex with no search function, rendering the Zendure battery system virtually functionless.
pas très réactive
bon c’est vrai peut faire. mais je ne cherche pas la complication avec l’application. les panneaux (3) sont des plug and play j’ai un shelly pour le contrôle de la consommation ( c’est là où elle n’est pas très réactive) elle gère les surplus sans problème
Fehlercode 33 nach Update
Nach dem neusten Update lief der SF800pro2 nach ein paar Tagen in den Fehlercode 33 (DC-Start Zeitüberschreitung) und läd seit dem nicht mehr. Die Fehler mit den ständigen W-LAN Abbrüchen nach Update konnte ich im Übrigen mit einem Umbenennen des verwendeten WLANs und der damit verbundenen Neueinrichtung der Netzwerkverbindung lösen. Nützt nur jetzt aktuell nichts mehr.
Startschwierigkeiten
Es lief nicht problemlos soviel vorweg. Solar Flow 2400 AC und das anscheinend bekannte „Batterien in standby“ Problem. Was wirklich geholfen hat: Test AC charging separately Temporarily isolate the SF2400AC from the HEMS. Go to SF2400AC → Settings → On-Grid Setting → AC Charging and set it to 800 W. Power off the unit and unplug the AC cable for 20 minutes. Check that the three-pin AC connector is firmly inserted, then try another confirmed-working outlet. Turn the unit on by holding the power button for 3 seconds. Set the input mode to AC and the input power to 800 W, then monitor it for about 5 minutes. Ansonsten bin ich zufrieden. Es läuft nun alles - leider speist man immer 50W ein wenn man auf eigenverbrauch stellt. 0 wäre mir lieber und die Batterien sollen bis zu x Minuten weiterladen damit das nicht immer unterbrochen wird.. vielleicht kommt das noch mit einem Update. Generell gutes Upgrade für uns/unseren Stromverbrauch und 2 Balkonkraftwerken.
Bin zufrieden
Moin, habe zwar nur einige Solarzellen und durfte gleich mit der v7.00 starten. Bei mir funktioniert alles übersichtlich und in Echtzeit. Einziges Manko, die Abgabe im unteren Bereich ins Haus 30% oder 0%. An die Entwickler: ein Zwischenschritt würde ich mir da schon noch wünschen. Danke
Battery nightmare - Defective Firmware Upgrades
After numerous ongoing issues over 2 years with a SBV 6400 the last straw was a firmware upgrade via the app which then knocked out any input charging capability via the grid/home power. The unit was returned (again) after having to jump through hoops with a now VERY poor customer service experience which still after months of patiently waiting we have still not been credited for over 4K! Their so-called warranty seems to be worthless. Would highly recommend after our experiences and many others online looking at other reputable manufacturers.
Works well
Unfortunately no way to add homewizard p1 meter
100%StanbyBug
App etwas verschachtelt sonst gut. Aber immer noch der 100% Standby Bug SF 2400 Pro !
Missing functionality
The app shows a lot of information but when you have another solarpanel system this data cannot be shown in the app. This is a missed chance because the data is already available in the app through the P1 meter. I would give 4-5 stars if this would be changed!
Funktioniert einwandfrei
Top Übersicht und viele Einstellungen möglich
System locks
Software locks up frequently after firmware updates. System does not respond to commands and if Wi-Fi or internet goes down so does power production to home.
Solang nur ein Gerät gesteuert wird ist alles in Ordnung
Die App funktionierte mit meinen SolarFlow 2400AC+ super dann habe ich eine Erweitert mit SolarFlow 800(ohne Akku)danach wurde mein 2400 nur noch mit 500Watt geladen. Also die App kann nur 1 Gerät managen! Schade ☹️ ⚒️⚡️🇩🇪⚓️
Umständlich
gekauft Zendure und einen Hoy…. Speicher Die Zendure App ist so kompliziert findet das WLAN nicht man muss Sachen eingeben die man so nicht braucht sonnst kommt man nicht weiter… Die App von Hoy…. Ist auf das wesentliche und ohne Probleme ins wLan eingebunden….. Das geht besser …….
verbesserungswürdig
Für einen Neuling auf dem Terrain Balkonsolaranlage mit Batteriespeicher und Geräteüberwachung (Shelly Plugs), ist die Einrichtung erstmal nicht trivial. Die Übersetzung ins Deutsche ist fürchterlich, sodaß selbst mit Hilfe einer KI und dem Hochladen etlicher Screenshots sich das unnötig in die Länge mehrerer Stunden gezogen hat. Alles funktioniert zwar erstmal so, wie gedacht, aber da wird auch Vieles ungenutzt bleiben, weil das Durchprobieren der Funktionen alles andere als intuitiv ist und keine Enteckerfreude aufkommt. Man fragt sich, warum so lieblos programmiert wird, und warum der Entwickler nicht selbst sein Produkt kritischer hinterfragt.
Im Urlaub 🌴
ACHTUNG…. Zwei von Drei ZENDURE Smart Plugins sind einfach offline 😡 .
I had to use my android phone to connect & C won’t change to F & zero customer service
1. I had to use my android phone to connect & Celsius won’t change to Fahrenheit & zero customer service. 2.Zero customer service? … no reply to several of my emails and phone call. 3.Numbers not accurate … said 11min to finish charging more than 30 mins ago and still saying 9 mins to charge. 4.Won’t change to F from C temperature … 3.Return it? …. I might return this unless they improve the app… What’s the point in having using the app if what it’s telling me of a lie?!
Une App en net progrès !
Zendure propose des solutions de stockage d’énergie très abouties (j’ai un SF2400AC+ avec 11kWh) mais le logiciel restait vraiment à la traîne par rapport au hardware. Cette nouvelle version est en net progrès et fonctionne parfaitement en autoconsommation. Le mode Zenki ne tient pas encore ses promesses faute d’un système de prévisions vraiment fiable. Il reste donc du chemin à parcourir…
App ist Katastrophe
Die App ist anfangs super gelaufen. Nach einem Tag, zeigt sie ständig (Netzwerk Verbindung prüfen) an. Das System wird nicht mehr angezeigt. Sie hängt sich ständig auf. Ohne eine funktionierende App macht das ganze System keinen Sinn.
Homewizard P1 not supported anymore
The app works ok for my simple purposes with SolarFlow 2400 AC+ and Zendure P1 meter (fixed rate, charge during day, discharge during night). Please note that the helpdesk now officially states that the app "IS NO LONGER COMPATIBLE WITH THE HOMEWIZARD P1 METER and there are no plans for future compatibility". Additionally, Dutch (and some English) translations could be improved.
Updates kommen regelmäßig
Grundsätzlich bin ich zufrieden. Es muss hier und da mit Updates verbessert und nachgebessert werden, aber das ist heutzutage ja „normal“. Ich nutze das System mit insgesamt drei Einheiten und 12kWh Batteriespeicher. Kommunikation erfolgt mit dem Energymeter von EverHome. Wichtig: ordentliches Internet, ansonsten kommt es ständig zu einem „Fehlverhalten“ und das System regelt dann nicht korrekt. App ist sehr intuitiv und wenn man sich einmal richtig damit beschäftigt hat, versteht und bedient man es tatsächlich easy.
No customer service
Stay away! Cannot function the app to turn off turn on anything no chat no service of any kind no telephone number in a bunch of spam. They want to create new accounts new websites I’m not registering new websites CCP
Application fonctionnelle mais parfois complexe
L’application en elle même fonctionne bien. Si on suit le tutoriel pas à pas on arrive à faire fonctionner le tout. Par contre s’il y a le moindre souci, il faut commencer à fouiner partout et ça peut vite devenir compliqué. N’hésitez d’ailleurs pas à utiliser le forum qui permet souvent devenir compliqué trouver des réponses d’autres utilisateurs.
Worst WiFi module ever
I can never connect the device to the WiFi. I’ve changed the WiFi to 2.4 GHZ and tried EVERYTHING!!!!! Also you can’t control the device without Wifi
superbase pro 无法找到 4G 充值页面
2021 年买的,我就 2022 年用过,后来基本吃灰,如今翻出来用,找不到 4G 充值页面,机器通过 2.4Ghz 无线网络连接也无法查看到联网信息
Happy user since 3 years
After some initial issues and many updates I have a very reliable setup (Hyper2000, 1400W peak, 3kW batteries). Zendure does a great job. I only feel a bit frustrated to feel permanent upgrading pressure due to the many hardware innovations.
Doesn’t Work!
Upgraded to new version and now can’t even log in to my account. No way to connect to my SBP now. ZENDURE: PLEASE FIX THIS NOW!
Shelly Smart CT
Hatte probleme beim Einstellen des Smart CT modus, es wurde immer dass maximum eingespeist. Nach mehrmaligem umstellen funktioniert es nun endlich. Und die Einspeisung folgt Hausverbrauch.
Not very useful
I’m not sure if it’s an iPhone issue but I can’t control anything with this app other than changing the light colors on my device on the bottom
Looks good, confusing interface
I have spent hours looking for guidance and how to optimize my system, in which mode to use. The interface is pretty, and has interesting animations, the manual says how to set up the system, it says nothing about how to use it! There are lots of videos on YouTube, probably because the interface is so counterintuitive and difficult. Unfortunately, I don’t speak German, so they are all use this to me. A local vendor in the US is grudgingly helpful, and so far hasn’t told me much more than I already know. Zendure, please publish an in-depth tutorial on which mode to use and when. Better yet make a smarter app that will accept parameters, and then do his job without needing to be monitored several times a day? How does one learn what the maximum output to the grid is? All this should be available from Xander, if it is, please help me find it! So far, my power bill has not changed appreciable since I installed the system. I’m starting to wonder if it was a good decision to purchase it at all.
The app is smart to use.
I have good control of my SuperBase Pro through the Zendure app. I often take my SuperBase Pro to the beach. I use the SuperBase Pro to power the blower and dry the dog's wet fur after my dog swims in the ocean. That's so cool!
Won’t send verify code
Just got my Zendure Super Base Pro but can’t use it fully because the app won’t let me register. UPDATE: Finally got the access code. Everything seemed ok until today. Opened the app and it had logged me out. Tried to login again and it said my account information was incorrect. Tried to reset my password and again…..no verification code comes through. The hardware appears good, the software is unusable. It’s too unreliable.
Possible improvements
L apply marche bien. Deux améliorations à avoir serait la possibilité de configurer le prix de l’électricité réseau en fonction d’un contract avec tarif différent en des heures et la possibilité de créer une routine journalière permettant de changer de stratégie en fonction des heures.
Terrible app
Super base pro only charges to 50% before dramatically reducing input watts ever since I installed the app plus you can’t access half the options available on the app while you are connected p2p and none of them while you aren’t
Application à améliorer
L’application est encore à développer: en effet, il est indispensable de pouvoir sélectionner plusieurs mode de fonctionnement en mode expert. Pour moi l’idéal serait d’avoir en 1 le mode compteur intelligent pour charger recharger le jour avec mes panneau solaire et en 2 le mode tarif électricité pour charger aux horaires tarif bas la nuit Or a ce jour, un seul mode est selectionnable donc tous les soirs il faut modifier l’appli .. très lourd De plus, la tarification edf tempo est inconnue par Zendure Espérons qu’ils ajoute cela
It's nice to see improvements.
Keep it up.
app doesn't work at all
no one can create an account se sure doesn't read or respond to support emails avoid buying these products
Répartition
Je viens de brancher un hyper 2000 avec une batterie ab2000s ce week-end. Pour le moment tout fonctionne très bien, j’ai créé un planning en mode rendez-vous pour charger la batterie en heures creuses et la décharger en heures pleines. L’amélioration suivante serait-elle possible. Lorsque la batterie se charge à partir du réseau électrique en journée en heures creuses et que les panneaux solaire produisent de l’énergie, l’ensemble cumulé est fourni à la batterie. Serait il possible de choisir l’aiguillage, c’est à dire chargement de la batterie à partir du réseau électrique et en même temps l’énergie fourni par les panneaux alimente vers l’habitation au lieu de charger la batterie ? Merci bien. Je compte également brancher un module Shelly sous peu pour voir la différence entre une programmation manuelle versus automatisée … à suivre.
Good battery… bad app.
The time until empty display isn’t jokingly inaccurate. Can’t change from F to C. The time left when charging is mostly inaccurate. The battery % and Input/Output watts seem to be reasonably accurate. But the time until Emory issue is a deal breaker.
Incomplet
J’apprécierais vraiment un mode démo ou je peux simuler mon installation sans avoir de produit physique
Nice app
Works great!
App is very basic
It appears the App is in very basic state. We just received superbase prod 2000 and attempting to hook up with App Not sure which one is faulty? App or Superbase pro unable to Vinny either with 4g or wifi. Sent an email to support and haven’t heard from them it’s over 1 day still waiting to hear from them. Not satisfied with the product
100w Schritte sind viel zu groß
Bei der Einspeisung bitte auf 10w Schritte umstellen, die 100w Schritte sind viel zu groß
How do notifications work?
I would like my SBP 1500 to notify me when the battery reaches a certain level. Currently, it only creates an in-app notification, but doesn’t generate a system-level notification, so it’s really useless to me unless I’m constantly opening the app.
Verbesserungswürdig
Bringt doch auch den Hub 2000 in das HEMS System 👍🏻 Abgesehen davon leider immer noch viele Übersetzungsfehler.
Some tip to setup your SBP2000
1. The app have some issues to setup WiFi: You need to turn on WiFi on the device then hold 3 seconds to hear a long beep to actually reset WiFi in connection status, by default it looks like it’s search a WiFi hotspot(maybe factory hotspot) but you maybe mistakenly think it’s in waiting connection status. 2. After connected to the SBP WiFi, you will need to enter your own WiFi name and password, by default it automatically popup its own device WiFi name in that column cause lateral WiFi setting failed. 3. It has two firmwares for DC and AC, somehow after upgraing and reset, my USB PD doesn’t have any output, I did a power cycle then it’s back to work, so don’t be nervous if you found it looks break after firmware update. 4. After firmware update, all the settings like charging limit, 50/60hz AC been reset to 50hz, make sure you adjust those values before use again. I feel all those are software issues, could be addressed by App update or firmware update in future. The unit looks absolutely beautiful and I hope it could add some RGB rainbow effects on Led lights
Not working
You could not even register for an account because the email verification code will never get sent to your email after trying 3 different addresses. Fix it
Much better after the last update.
The developers definitely read the reviews and fixing the bugs ) Thanks. Here are some bugs: - when resetting the password and say yes to “save the login and pass to keychain” it saves it wrong way so that later it places the pass to both, the login and to the pass fields. The saved login is ignored. - when charging time is 1.4 hours on the device itself, the app says charging time is 14 min )
won’t connect to wifi
Tried to write review but it disappeared. Connection is has not been fixed. Requires 2.4 Gz network, which mine is, but after selecting my network and typing in my network password, it continuously states “connection error” and says to re-select and enter again. Can’t get passed this. Contacted cust svs via email, & was asked to send video of problem, and to try another 2.4 Gz network. Went to friends house, tried same, & still can’t get past connection error. Since there are reviews with same complaint obviously there is a problem with their app, which has not been fixed. Waiting to hear back, but so far nothing further. Will have to resort to placing phone call to them.
Zendure FAQ
- Is Zendure free?
- Yes. The app is free, in all 175 countries it sells in, and it sells nothing inside it.
- Does Zendure have a free trial?
- No. None of its offers (US) come with a free trial.
- What are the best alternatives to Zendure?
- S-Miles Installer (4.2 from 1,472 reviews), S-Miles Enduser (4.3 from 1,257 reviews) and S-Miles Home (4.5 from 1,042 reviews).
Zendure download
Last updated 16 days ago.
Zendure sells in 175 countries. It was released 4 years and 11 months ago, on 4 Dec 2021. It holds a 2.6 rating from 605 reviews.
Supports 16 languages: English, Czech, Dutch, French, German, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Chinese, Slovak, Spanish, Swedish, Ukrainian.
How much does Zendure make?
Third-party estimates for the last 30 days, worldwide — not the store's own figures, which Apple publishes for nobody.








