THR Remote




How much does THR Remote cost?
Prices are current as of 8 Nov 2026.
THR Remote has no in-app products on record in the United States.
10+ alternatives to THR Remote
![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Rating / 5 | 2.3 | 3.5 | 2.5 | 2.7 | 3.5 | 2.9 | 2.0 | 4.1 | 3.8 | 2.0 | 2.8 |
| Reviews | 754 | 420 | 295 | 229 | 130 | 126 | 125 | 120 | 100 | 88 | 12 |
| Released | 2019 | 2021 | 2019 | 2018 | 2024 | 2024 | 2024 | 2022 | 2024 | 2021 | 2025 |
| One-time price | — | — | — | — | — | — | — | $15.95 | — | — | — |
The going rate for each plan in United States, in its own currency, shaded from the cheapest price on the row to the dearest.
THR Remote reviews
2.3 out of 5, based on 754 reviews.
What people like
- Works great after iOS updates
- Tones sound excellent and rich
- Lots of cabinet models available
- Simple interface for quick practice
What they complain about
- Bluetooth connection drops constantly
- App freezes and crashes often
- Virtual knobs are hard to turn
- Settings reset when you switch amps
Works completely fine! Update your unit!
Guys, it works perfectly fine! I have this app on my iPhone 13 Mini, iPad Mini, and my MacBook Pro - it all works! People either have no clue how bluetooth works or they haven't updated the firmware on their actual THR unit (it even says to do this in the latest release notes and it takes 5 min). I use this with the G10TII too and it works great. Yes I’ve seen it disconnect but it always reconnects within seconds. If you don’t want to deal with firmware updates/bluetooth you shouldn’t have gotten this kind of amp. I absolutely love my THR30II and the range of tones it produces. It’s a shame the people who don’t know how to read instructions or do the most basic troubleshooting are the ones leaving all the bad reviews.
Connects 10% of the time
Buggy, slow, unreliable for gigs. The amp is awesome but the app is a huge letdown.
2024 review
Works great and is easy to use for practice playing etc. I haven’t had any issues since I bought it in 2023 so I’m very happy overall. My only complaint is it would be nicer to have more storage options or swaps than 4 but that’s more of the amp issue.
App is not smooth
The app always states there’s an upgrade. After 20-30 minutes I’ll have to power cycle the amp to make adjustments within the amp. It could be better.
THR remote app
I’m being generous with the 3 stars. Download for a new THR 10ii-20 wireless. Cumbersome and overly sensitive to adjustments on an iPad. The old THR editor for the original 10C was more professional in appearance and easy to adjust with the mouse on my Mac. On appearance the current app looks washed out and visually boring. The factory and artist presets are simply awful. If Chris Buck sounded that bad in concert, I’d want my money back.
Remote control is awesome
It’s wonderful to be able to control my amp from my phone. The enhanced controls for the FX are beneficial and the bonus FX are a nice surprise.
Garbage
Haven’t been able to connect to the amp in oh, I’d say a year and a half. Phone and iPad. Firmware update, factory resets, etc. Tried everything. I still like the amp but not happy that there are a ton of features I can’t use.
気に入ってますが
アプリなら、プリセット10個くらい(それ以上)出来るようにして欲しいです。
Constant disconnect
Just wanted to say that I just updated the firmware of the THR10ii itself, and the app still disconnects from the amp within a couple minutes of using it. I give it 2 stars because it’s great to be able to use these features, and if you can save to a preset and assign to the amp in time, it will remember it, but because it constantly disconnects you find yourself tweaking settings only to discover that nothing is changing and you have to start from scratch by closing the app and reconnecting. I’m not sure what the issue is where it can’t just maintain a simple connection, but until the app is fixed I wouldn’t advise anyone expects to use it as its intended. Yamaha, please do better.
Works fine on some devices
The good is that it works fine on my Mac and iPad but despite all my efforts will not work on latest iPhone or iOS for iPhone. Just cannot see the device from within the app tho the THR is connected and I can play iPhone music on the amp. And yes, Tech Support, I updated the THR system just today! Given the other reviews it’s kinda shocking I have to write about this obvious flaw. I did not try with other mobile or PC OS environments to see if iPhone is the only issue. Works as advertised on the other devices. Able to access more than just device itself such as two other suites of amps plus about 40 Yamaha created presets, which could provide an instant 6th “preset” tho patience to download plus volume likely won’t match. If you’re really industrious and memorized a manual setting literally dialing it up on the device live you’d have a 7th but it’s gone once any other preset is invoked. Now, what about enduring my phone can control my THR so I don’t have to deploy some kind of computer?!!!! Be nice if Yamaha included the USB cable too though with so many different computers which USB to put on the other end? Those of us with hubs wouldn’t have to worry.
So far no issues
So far I am not having any issues. I am using this app on a 2021 iPad with my new THR30II Wireless. Cool app, its nice to be able to play with some amp parameters. That being said, I do wish there was more to play with. They could do a lot with an app like this, but seems like they are purposely limited its capabilities.
Works 10% of the time
There is no rhyme or reason as to when this app chooses to connect to iPhone. It isn’t very often though!
I like it WITHOUT Bluetooth Remote
The Bluetooth certainly has its issues with the remote app. Once I switched to the USB type B to lighting on my iPad. The app works just fine. I have the THR30ii and beginning to like it a lot.
Disconnects Constantly
I’d give this a 4 if it would connect to Bluetooth consistently and stay connected. There’s a slim chance chance it will actually connect when turned on, meaning that my device says it’s connected, but the app isn’t communicating with the amp. And then I have to go through the annoying dance of turning off and on the THR, closing and restarting the app in an attempt to get it to connect. Maybe I need to update the THR software? Idk but if so, the app should tell me if there is an update and how to install. Beyond the connectivity issue, which is by far the worst problem, there are lots of usability improvements that could be made: 1. I don’t want to swipe to access the other effects. These should be located at the bottom of the screen as category tabs. I don’t want to swipe 4 times to get to reverb. If there are too many categories to fit, make the tabs scrollable. 2. It would be nice if there was some kind of a tone guide to the different types of amps and cabinets and how to create specific tones by combining them. 3. Grouping the cabinets and giving more description about them 4. Remembering settings 5. Minor things such as being able to double tap the name of the preset to select all text, visual design padding is a mess. 6. A nice touch would be to have haptic feedback when you turn the dials.
Web 1.0
This definitely has the feel of using a PC in the 1990’s. Lots of things can hang up the functionality that you just have to detective on your own. If you can get it working, it does have some great tones.
Thank you for the much needed update
Thank you for this recent update on may 31st. Not having access to the main gain knob in the app was a real drag and it would often need changing switching between amps. Something with the output gain was definitely not working correctly before but this update. The app/firmware update has seemed to solve most of my issue I was having with my thr30II wireless, so I’m happy. This thing is such an awesome little amp with a wide variety of the sweetest tones. Thanks again guys, it’s much appreciated! 🙏🏻
Trash app
Constant issues with loading presets and various bugs with this app, you end up spending more time troubleshooting how to make the amp do simple things than actually playing. Yamaha got their money, they just abandoned this app.
Aux gain level
Hey Yamaha. Love this amp. Please add a way to adjust the gain level of the auxiliary input so it can mixed and balanced via the usb output. That would be so helpful. Thanks.
When it works, it’s decent.
But it rarely works. What’s the point of buying the amp?
YAMAHA PLEASE UPDATE THE APP
It’s sweet. A perfect, aesthetically, beautifully sounding amp. With some of the worst connection issues… Just give it a little love guys, cmon. She ain’t cheap. And this app gives you so much more bank for your buck. Stop letting this product get resold, if ya want 🤘🏼
Much better with 14.3!
App disconnecting and freezing fixed In 14.3. Back to working reliably!
Keeps crashing
Keeps crashing after bluetooth connectivity - unusable
中々良い
iPad 第8世代(iPadOS14.4.1)、THR30ii(ファームウェアVer.1.40)で使用していますが快適に操作できています。途中でBluetoothが途切れる等のトラブルは今のところありません。LINE 6 Relay G10Tを挿しっぱなしにしても常に満充電にしてくれるEco Rechargeオフの設定も出来て便利。 ツマミに関しては他の方も書いてますが、ツマミを回すのではなく上下に動かすと良いです。この手のUIで良くあるやつですね。 不満はGUITARボリュームを操作出来ないところ。これはワイヤレスの人は必須ではないでしょうか。あとアンプ本体の電源を切っても次に電源を入れた時に自動的に再接続すると取説にありましたが、再接続されず、毎回右上のBluetoothボタンから接続しなければならず少し手間です。 【追記】 THR Remote ver.1.2.2でGUITARボリュームとAUDIOボリュームが追加されました。凄い!
It works maybe 1 out of 10 times. Buy a spark instead!
When it connects to my THR30II it’s great! But frequently it will say it is connected, but the controls won’t work and any changes on amp don’t show up in app. And if you click settings it says no device detected. But under the Bluetooth icon in the app it shows the THR amp and that it is connected. It stops working frequently with me. It will be connected to the amp and I can make changes, then at some point the changes stop taking effect. I don’t know if this is the app or amp, but I never have any other problems with the amp. Quite frustrating. Update months later: I should have bought a spark go. This app and Bluetooth connection on the Yamaha is so flaky and buggy.
Issues
Software flaky, amp needs power cycling every couple minutes to regain connection. Able to download patches but needs work
Works great with latest OS update
The latest OS update has solved the Bluetooth connection issues and the amp and app now work well. Editing the cabinets and compressor really helps with the range of sounds you can get from the amp. Great for late night playing on the couch.
ok when it works BUT…rarely works
sometimes this app just refuses to load. I’ve tried disconnecting and reconnecting (it shows up as TWO DIFFERENT bluetooth connects, presumably one for the actual amp modeler and one for a generic bluetooth speaker?), ive tried deleting the app and starting from scratch. Sometimes the app starts up and just says “creating thr engine” indefinitely. Really really poor quality from yamaha, especially since the old desktop app (the older THR10 amps didn’t have bluetooth) was so simple and useful. Replacing it with this mobile feels like a MAJOR downgrade.
Please fix this
Edit: Apologies to Yamaha. Appears the Bluetooth issue was caused by Apple but it’s fixed now by the latest iOS update. Works great again now! Worked okay for a while but since firmware update I can’t maintain a BT connection. Seems to be a problem for pretty much everyone. This makes most of the functionality unavailable for the 10iiw because you can’t get to the other amp types without the app.
UI needs work
The dial controls in the app are terrible, sliders or pretty much anything else would been better. Please update Yamaha.
Great, but BUGS with the cabinet mod
The multiple Cabinet models are the BEST! BUT… if you change amp models (clean -> crunch etc) it LOSES the selected cabinet and resets. This makes dialing in a good tone with the cabinet sims nearly impossible.
How much longer before we get a fix?
I have had this amp for a year, I use it everyday and I love it. However, the issues following the IOS 14 upgrade have been know for more than a month now but still no fix and no idea when it will be released. The current issues make the amp useless for me as I am always switching sounds and tweaking the excellent palette of sounds. It seems the issue was with iOS 14.2 and no the app. I have just installed iOS 14.3 and the app worked perfectly again. Now very happy and back to playing my beloved guitars
Can’t connect to my THR
Currently the app doesn’t work at all
便利なアプリですが、追加してほしい機能もあります
Wirelessユーザとして、以下の機能を追加していただけると、うれしいです。 ・チューナ機能 ・GUITAR/AUDIOのボリューム調整機能 ※ツマミが回しづらい方へ ツマミは回そうとするのではなく、ツマミ部分で指を上下に動かすと調整しやすいです。
Bluetooth Sync for Amp Control Not Intuitive
I originally rated this 2 stars for the THR 30II Bluetooth amp control being hard if not impossible to sync. It definitely behaves like old school bluetooth did. A simple sync, power reset on the amp and app refresh fixes it. Should I need to do this, no. Is it workable, yes. No massive complaints outside the Bluetooth. UX needs work, but is serviceable. I would like to see some work here to make it more functional for digital control. It is intuitive, but a bit janky to use manual control ideas with a digital medium without proper indication.
Almost there
This is pretty good especially considering you get all the models we used to have to buy extra units for. Two improvement requests before I would rate 5 stars: 1. The global volume makes this impractical for performance rehearsals due to the inability to program a simple boost for solos. Please consider adding an assignable volume boost. 2. Even though the sounds switch immediately with Bluetooth MIDI, there is some serious latency with the display switching.
It’s Back!
Other amps that are app controlled can offer too much choice and be overwhelming. I love the simplicity of the Thr remote app. When coupled with the amp it has more than enough versatility and range of tones.
Update the app
It’s really hard to connect the Amp to my iPhone. Fix it fast.
Bluetooth connectivity issues with iOS update
^^
App worked at first but now just closes
The app worked perfectly the first time but now just either freezes or loses constantly.
Need to improve app stability
The functions are OK. I met disconnection (with the amp) or app crash issue every now and then (perhaps every few minutes or each time I open the app.) This makes the experience really bad. I couldn’t say it’s very ‘usable’. Please do necessary tests before releasing the app.
Freezing & Dropping Off!
Ever since the latest firmware release & iOS 14.2 update, this app has become useless. Constantly freezes when trying to load presets & Bluetooth keeps dropping out. I love the amp but please fix this app before I sell the thing & buy a Fender!
No updates!
Is that ok?
ツマミの回し方
各ツマミが回しづらい! デザインより使い勝手を優先して欲しい。 バータイプとか、ブラスマイナスとか。 みんな、どうやって回してるのだろうか?
Untested, buggy, half-finished
When you spend $500 on a practice amp… you would expect the app for the amp to be pretty slick. Unfortunately, it seems like Yamaha cut every possible corner on this project. There are bugs everywhere, the UI doesn’t make much sense, it is super laggy, it doesn’t connect automatically when you open the app (even when Bluetooth is paired), changing a setting like turning on/off the LEDs re-sets whatever sound you had. It seems to kind of work the first time you power it on and load the app, but if you switch apps or come back 10 min later, nothing is connected/works. Did a QA team even look at this? The only upside to this app is you can add in a very good compressor and select a variety of pleasant reverb types which are unavailable on the physical amp. Makes a huge difference tonally.
Freeze when switch presets
The app would freeze when tapping the 1,2,3,4,5 below the controls.
Works perfectly
The app works flawlessly for me on iPhone 11, I would really like to see a preset exchange built into it, people like sharing presets and others like trying them out, it really should be implemented as soon as possible, the amp itself is superb though, absolutely brilliant
Wow
Pretty much everything that can possibly go wrong presents itself here. Navigation between preset vs. user memory slot makes no sense. Unresponsive. Cab models change on the fly regardless of how you save them. Unstable overall functionality & constant crashes. Shoddy bluetooth syncing.
総じてTHRユーザーには申し分ない
ですが、wirelessユーザーにとってはアプリ内のguitar ボリューム調整は必須ではないでしょうか、、。 可能であれば期待します。
App crashes
Please update the app. It keeps on crashing on me and I’m to the point of returning the amp because I feel like I’m missing on on all the features.
Keeps freezing
On latest iOS as of 8th of NOV 20 it’s no good keeps freezing every time you change something
THR Remote FAQ
- Is THR Remote free?
- Yes. The app is free, in all 175 countries it sells in, and it sells nothing inside it.
- Does THR Remote have a free trial?
- No. None of its offers (US) come with a free trial.
- What are the best alternatives to THR Remote?
- Cortex Cloud (3.5 from 420 reviews), BTS for WAZA-AIR (2.5 from 295 reviews) and BTS for KATANA-AIR (2.7 from 229 reviews).
THR Remote download
Last updated 1 month ago.
THR Remote sells in 175 countries. It was released 7 years and 2 months ago, on 18 Sept 2019. It holds a 2.3 rating from 754 reviews.
Supports 1 language: English.







