InverGO
UtilitiesLifestyle

InverGO

桂英 李

How much does InverGO cost?

Prices are current as of 25 Oct 2026.

InverGO has no in-app products on record in the United States.

10+ alternatives to InverGO

InverGOMyDolphin PlusFairland Smart PoolFronius Solar.webAqua TempAero XPInverFlowAseko LiveAI-BotMadimack GT
Rating / 54.64.64.52.61.73.14.42.51.8—
Reviews4K19K1.7K1.2K7662051851211—
Released2019201920182020201920182021201620222023

InverGO reviews

4.6 out of 5, based on 3,978 reviews.

What people like

  • Easy to set up initially
  • Remote control works when connected
  • Simple interface for basic tasks

What they complain about

  • Connectivity drops constantly and randomly
  • Recent updates broke the app completely
  • Shows wrong or frozen temperature readings
  • Support team never replies to complaints
★★★★★ Australia · v1.0.4 · 15 Aug 2023

Easy…….

Having had the heater for nearly a year now and enjoining so much more use because of the heater and the app to control it is so easy to use and adjust from the ease of my phone. Highly recommend 🙏🏻🙏🏻👏🏻👏🏻👏🏻

— Peel299

★☆☆☆☆ Australia · v1.1.2 · 13 Nov 2025

App doesn’t work

For the last few weeks the app doesn’t work. The temp doesn’t move from 26.5 degrees all day every day on the app. But shows the correct temp on the unit. Also the percentage and kw’s don’t change at all even when on the different modes. Can someone please fix it

— shanepl👊🏼

★★★★☆ Portugal · v1.1.1 · 2 Oct 2025

Mr Pure

Satisfeito com a app para poder monotorizar a qualidade da agua atraves do salinizador Mr. Pure

— Ivo Fortunato

★★☆☆☆ Germany · v1.1.1 · 11 Jun 2025

Sehr minimalistisch

11.06.25 Habe einen 11kW Inverter für meinen Pool. Bis heute verstehe ich nicht, warum in der App nicht alle Werte einsehbar und einstellbar sind. Mindestens der Temperatur Unterschied zwischen Eingang und Ausgang sollte erkennbar sein. Diesen muss ich mühsam am Inverter selbst mit sehr komplexen Tasten Akrobatik auswählen. Daher noch viel Potenzial nach oben verfügbar.

— Wally-iPad

★★★☆☆ Australia · v1.0.4 · 19 Sept 2023

Touch dial for temperature too sensitive

It’s easy to accidentally change the temperature. Should maybe require an actual drag around the dial or a long touch

— fewfewsdvsdgs

★★★★★ Germany · v1.0.4 · 30 May 2023

Gut aber Anzeige zu ungenau

Manuelle Kontrolle wie auch die Zeitsteuerung funktionieren tadellos. Eine Temperaturanzeige mit wenigstens einer Nachpunktstelle wäre zeitgemäß. Das ist keine große Sache, da Temperaturfühler analoge Werte übergeben.

— Fattelhavre

★☆☆☆☆ Australia · v1.1.2 · 24 Oct 2025

Latest update has sent my device offline

After updating the app, I can no longer access my heat pump. I am stuck in the opening screen asking me to confirm if I’ll let them store data about my usage. When I save the settings the app says the network is unavailable. I cannot get past this page.

— Tague100

★★★★☆ Netherlands · v1.1.1 · 13 May 2025

Missing functionality

The ability to select the Mode type (Boost or Silence) has been removed from the schedule functionality. I used to be able to schedule Boost mode in the morning to get back up to temperature and then change to Silence in the afternoon. Can you bring back please?

— Absolute rubbish (v1.1)

★★☆☆☆ Germany · v1.1.1 · 7 May 2025

App verliert Verbindung

Seit 1 Woche entfernt die App die Wärmepumpe von selbst. Dh jedesmal gerät zurücksetzen und neu verbinden&konfigurieren . Dann kann man die Bedienung gleich Manuel am Gerät machen!

— heriberti 2

★★★☆☆ Australia · v1.0.4 · 1 Oct 2022

Needs some work

This app is useful but needs some work… It is useful for remote access and control but very limited and has a few bugs 1. The interface is erratic. It takes several presses to change the mode (power level) and it is easy to accidentally change the setpoint when trying to access the query page. 2. The timer function is extremely confusing. The switch operation is backwards! You have to program the switch to “open” to close the switch/turn on and set to “close” to switch off. Completely against convention! 3. It is useful to see what current operation is, temp in/out, current pool temp, refrigeration performance (although some parameters are backwards). However, the pump/heater have to be running to see what the pool temperature is. It only shows current information. It would be great to be able to see the last temperature after the heater stops or even better, trend graphs to see performance over time. 4. The app appears to be able to connect to other devices for further automation but it is unclear how to do this. A useful feature would be the ability to automate the heaters operation based on solar PV output.

— Arethereanynicknamesleft???

★★★★★ Australia · v1.0.4 · 6 Dec 2022

Great app - it just works with our pool heater

Some equipment manufacturers apps are so poor. This is not one of them!! Works perfect, very easy to setup. Can check our pool temp anywhere and turn on, change temps all very easy. Works perfect every time!!

— Reif99

★☆☆☆☆ Belgium · v1.1.1 · 8 Sept 2025

Difficile à appairer

Nécessite d’innombrables tentatives et des connaissances approfondies pour finir par y parvenir. Quand on y parvient.

— Isou63

★★★★☆ Germany · v1.1.0 · 23 Jun 2024

Ein bisschen Luft nach oben…

Hallo, erstmal ist die App sehr gut gelungen. 😊 bitte wenn möglich noch folgende Dinge integrieren: -Eine Statistik der Temperaturveränderung mit Hochrechnung wann Ziel erreicht. - Stromverbrauch in KWh Ansonsten alles Top.

— mistergsx1400

★★☆☆☆ Australia · v1.0.7 · 8 May 2024

Levels in timer and buttons don’t match

App overall is ok and works, but the names of the levels don’t match: On madimack pump (high medium low) On buttons on app (power perfect silence) On the timer function in app (boost silence super silence) Super confusing!

— Riblau

★★★☆☆ Sweden · v1.0.4 · 16 Sept 2022

Funkar

Eftersom man inte kan se aktuell temp när pumpen är avstängd borde det gå att välja ännu lägre temp för att underlätta vid vinterstängning. Jag stänger inte förrän vattnet är < 10 grader så nu får man mäta manuellt. Tycker också att temperaturreglaget är alldeles för lätt att komma åt och ändra av misstag. Borde finnas en bekräfta-knapp

— Kaktuzmamma

★★★★★ Australia · v1.0.4 · 13 Sept 2022

Love it

Great app. So easy to set up and control the pool heat pump.

— p.baker

★☆☆☆☆ Australia · v1.1.1 · 12 Dec 2024

Name should be “DisappointinGO”

Controlling over app is not working for me all I can do is readings….That is the major issue a part of that some small things like graph have to be manually move every time to current readings and it doesn’t support latest products which makes it hard worth keeping. Disappointed

— latosinski

★★★★☆ Germany · v1.1.0 · 22 Jun 2024

Die App ist gut, das Problem liegt bei der Wärmepumpe

Habe diese App und Wärmepumpe für den Pool seit 2 Jahren Dauernd ging die Kommunikation mir der Pumpe verloren (Anzeige Offline). Habe die Kommunikation auf 2,4 MHz gesetzt, ohne großen Erfolg. Kommunikationsmodul in der Pumpe wurde anscheinend ausgetauscht (laut Pool Service), ebenfalls ohne Erfolg. Manchmal klappte es, manchmal nicht, je nach Wetterlage. Letztendlich einen zusätzlichen Fritz Repeater in ca 3 m Entfernung platziert, an einer Glastür. Jetzt klappt alles wunderbar. Meine Schwimmbadpumpe läuft über eine Zeitschaltuhr, dh wenn diese abschaltet meldet die Wärmepumpe den Fehler (F3 glaube ich und es wird nach kurzer Zeit die niedrigere Umgebungstemperatur angezeigt). Das heißt aber nur dass kein Wasser zirkuliert. Sobald die Poolpumpe wieder läuft, läuft die Wärmepumpe mit auf den eingestellten Wert Das eigentliche Problem liegt meiner Meinung nach in der schlechten Antenne der Wärmepumpe, die in meinem Fall auch noch auf der „falschen“ Seite (rechts) liegt , während die Wireless Verbindung von links kommt und erst mal durch das Metall durch muss.

— rayh9

★★☆☆☆ Australia · v1.0.5 · 15 Nov 2023

Bugs and Cheap

This latest update doesn’t give me correct readings or live results. I need to arrow back (which also doesn’t work well), then back in to refresh. My heater also disappeared off the app, then I had to setup again. Could you also include notifications when my heater turns off and goes in to a fault mode…. Which is often! I have spent $20,000 on solar panels to run this heater and equipment, it would be great if the app could integrate with my Enphase solar system to determine power output of heater!!

— I-Xions

★★★☆☆ Australia · v1.0.4 · 14 Sept 2022

More options needed

The app needs to also show further details that too could get on the main unit e.g. the outgoing temperature and maybe also the water flow per hour etc.

— theKkmaster79

★★★★★ Germany · v1.0.4 · 1 Jul 2022

Funktioniert

Die App funktioniert mit meiner Wärmepumpe einwandfrei

— Andiburk

★☆☆☆☆ Australia · v1.1.1 · 21 Oct 2024

Buggy and poor English

Terrible app. Sensors don’t show properly, buggy and terrible English

— kingsk23

★★★★☆ Germany · v1.0.4 · 4 Jul 2023

Gut und einfach gelöst, aber…

Was mir fehlt ist der Stromverbrauch pro Tag Woche Monat… und eine genauere Temperaturanzeige

— Tommihilfiger

★★☆☆☆ Australia · v1.0.5 · 25 Oct 2023

Update has made app frustrating to use

Prior to the latest update in October, the app was great and easy to use. However after the update I have to reset the app every time I want to check it. Even after resetting the app, sometimes it still doesn’t give the correct info and requires a few more resets. Hopefully they can fix that issue but then add in some more tools like charting the temp over a given period of maybe a week.

— Madcrazymikedude

★★★☆☆ Germany · v1.0.4 · 17 May 2022

Zeigt immer Fehlermeldung an

Zeigt mir seit gestern immer eine Fehlermeldung F1. Fehler steht aber nicht im Display der Wärmepumpe.

— Andi127657865788

★★★★★ Germany · v1.0.4 · 22 May 2022

Leider seit 3 Tagen Fehlermeldung

Leider ist die App seit 3 Tagen nicht mehr korrekt. Sie zeigt leider den Fehler E3 an. Dieser wird nicht in der Pumpe selber angezeigt und die Pumpe läuft ganz normal durch. Hoffe auf ein schnelles Update. Bisher hat alles super funktioniert.

— David2204

★☆☆☆☆ Australia · v1.0.5 · 7 Feb 2024

App Connection Issues

After 2 years of being able to control the temperature settings and on/off times in the app, I can no longer connect to my inverter to do this. When trying to reconnect, the device is not connecting to my Evo Heat Active-i 9 heat pump. Extremely annoying with the pool temperature now being to cold for my liking but unable to set and adjust on/off times to keep the temperature under control. I hope the app developers fix this bug issue ASAP!!

— Gillespie87

★★★★☆ Germany · v1.0.4 · 5 May 2023

Probleme

Die App funktionierte im letzen Jahr sehr gut. Es war richtig schwierig das Gerät zu integrieren. Nach etlichen Tagen hat es dann endlich funktioniert. Seid diesem Jahr gibt es Probleme mit der Kommunikation zum Gerät. Ein/Aus geht. Alles andere wird nicht mehr gesendet. Es gibt keine Erklärung warum??? Der Support (gibt es einen) meldet sich auch nicht. Hatte im letzten Jahr schon mal geschrieben, gemeldet hat sich ich keiner!! Die Hoffnung stirbt…..

— ubuente

★★★☆☆ Portugal · v1.0.4 · 6 May 2022

The temperature shown in the app does not contain decimals

i live in Portugal and i have just bought a heat pump mr silence. While the display on the machine show, one decimal, the app invergo shows none. Example. If the machine shows a temperature of 22.5, the invergo app shows only 22. Only when the temperature reaches 23, we are able to check it on the app. Could you please be so kind to correct this, by adding 1 decimal ?

— Almeidinha1

★★★★★ Germany · v1.0.4 · 20 May 2022

Fehlermeldung

Die App zeigt mir seit einer Woche Fehlermeldung an, obwohl die nicht im Display von dem Gerät stehen. Zunächst E5 und jetzt durchgängig E3. Und der Durchfluss für diese Fehlermeldung ist definitiv gegeben. Sonst würde das Gerät ja aufhören zu stoppen.…Wer hat sonst noch solche Probleme?

— ArthurKnu

★☆☆☆☆ Australia · v1.0.5 · 31 Oct 2023

Doesn’t work

Since the app update happened I haven’t been able to connect to my heat pump

— Chrisjf75

★★★★☆ Austria · v1.0.4 · 23 Aug 2022

Wunderbar

Alles super, ein paar Kleinigkeiten wären noch super, wie zum Beispiel: Zehntel Grade, Optik geht sicher schöner, Ein - und Ausschalten im offenenMenü. Danke!

— Danubiasax

★★★★★ Australia · v1.0.4 · 10 Mar 2022

Basic but does it well

Remote access to heat pump, enabling settings to be altered wherever I am. Plus shows pool temp. Very happy

— bertieb-oz

★☆☆☆☆ Germany · v1.0.4 · 16 May 2023

Die App verliert seit Tagen die Verbindung zur Wärmepumpe

Obwohl die Wärmepumpe im Netzwerk erscheint und die Verbindung gut ist, verliert die App ständig die Verbindung.

— BadenWolf

★★★★☆ Switzerland · v1.0.4 · 29 Mar 2022

Wenn, dann…

Grundsätzlich gutes App! Wenn, dann müsste die Timer-Programmierung optimiert werden.

— bneyer

★★★★★ Australia · v1.0.4 · 18 Jan 2022

Control in the palm of my hand

Love this app and what it allows me to see and do via my phone. From setting the temp, to seeing the current temp, turning on and off. It’s fabulous

— JulieC2003

★☆☆☆☆ Australia · v1.0.4 · 2 Jan 2022

Horrible

Needs access to needless info, doesn’t actually recognise networked devices, even though I have 160mbps where I am trying to connect this device through this app, it still doesn’t recognise that I’m on the 2.4ghz. Times out and simply doesn’t maintain a standard

— Thereo

★★★★☆ Germany · v1.0.3 · 5 May 2021

Man kann die App sehr gut nutzen

Verbrauchsdaten wären optimal. Zwei Mini-Bugs auch entdeckt, was sich jedoch nicht auf den Produktivbetrieb auswirkt.

— BigDaddy911

★★★★★ Germany · v1.0.3 · 4 Jul 2021

Funktioniert gut

More functions would be nice. I would like to get all information that my heating presents on the display and also data for electrical consumption.

— meis-hd

★☆☆☆☆ Australia · v1.0.4 · 5 Sept 2021

For simple control needs a lot of personal information

For access to a WiFi enabled pool heater it needs a lot of personal information for no apparent reason. Like location, access to other devices on WiFi network (even though it uses internet), and tracking across other apps

— rickelles

InverGO FAQ

Is InverGO free?
Yes. The app is free, in all 174 countries it sells in, and it sells nothing inside it.
Does InverGO have a free trial?
No. None of its offers (US) come with a free trial.
What are the best alternatives to InverGO?
MyDolphin Plus (4.6 from 18,797 reviews), Fairland Smart Pool (4.5 from 1,710 reviews) and Fronius Solar.web (2.6 from 1,180 reviews).

InverGO download

Last updated 1 month ago.

InverGO sells in 174 countries. It was released 7 years and 3 months ago, on 5 Aug 2019. It holds a 4.6 rating from 3,978 reviews.

Supports 11 languages: English, Arabic, French, German, Italian, Japanese, Korean, Portuguese, Russian, Chinese, Spanish.

How much does InverGO make?

Third-party estimates for the last 30 days, worldwide — not the store's own figures, which Apple publishes for nobody.

Revenue < $5,000
Downloads < 5,000
Open the full InverGO analytics Revenue and downloads month by month, all 174 countries split out, and every product's share and trend